Search results

  1. dingbat

    Adding an axillary fuel tank information resources?

    I have a 94 gallon main and a 54 gallon aux tank on a 22’ Walkaround Both tanks are mounted on centerline. One under the cockpit floor and other under the helm floor. Both are accessible with removable floor panels. Uses a two way selector valve to switch from one tank to another The hard...
  2. dingbat

    Smartcraft: how to disable Digital Trim ?

    post #15 https://forums.iboats.com/threads/trim-fault.240257/
  3. dingbat

    Putting things back on the boat

    Unless they revised the instructions since I installed mine, Bennett recommends 30 minute marine epoxy for the screws
  4. dingbat

    N W S and NOAA post Hazardous Weather Conditions. When my area is having normal weather. Why ?

    Depends on what you call fearful conditions. Half the people think everything is out to get them. The other half doesn’t know they are in danger Like on a barrier island…..lol Been going on for years. Wasn’t until recently the national media took notice and sensationalized it.
  5. dingbat

    1984 CVX20 Ski machine service manual

    3/8” fuel line A collapsed primer bulb is typically a vent issue
  6. dingbat

    New Rescue Boat???

    A flooded river valley in the mountains. Not enough fetch to create large waves.
  7. dingbat

    Fuel filter question

    Not a fan of aftermarket filters unless they provide detailed specifications noting pressure drop, and efficiency at a minimum. I can have a (documented) Racor filter for my system (S3214) delivered to my front door within 24 hours for $15 You can buy just the element. Realize, with the...
  8. dingbat

    Fault code list needed

    https://www.ziptuning.com/tuning-file/dtc-removal-service/p-codes-diagnostic-trouble-codes/
  9. dingbat

    Sustainable Electrical Setups for Older Motors

    Like water, there are two components to electricity, Voltage and Current Voltage is the equal to pressure Current is equal to flow If you want to power your "accessories, you need to calculate current demand over time (flow) to power them. Voltage is important, but not for this exercise
  10. dingbat

    Axle Tube Drain Holes?

    One has to ask themselves…….how did the axle make it 40+ years if it needed additional (drain) holes to keep from rusting out? Don't fix someone that isn't broken….lol
  11. dingbat

    Only select Items 12v and 110 will work on my boat...Very puzzled

    ugh..... that may be your problem. Schematic shows both batteries tied together (normal) then grounded to "system" through the battery charger ground
  12. dingbat

    Only select Items 12v and 110 will work on my boat...Very puzzled

    Did you leave the ground cable off one of the batteries when you installed them?
  13. dingbat

    Only select Items 12v and 110 will work on my boat...Very puzzled

    OK, we have power ........ kind of.. Have you checked the primary battery voltage? I see you have a 12V Fridge. It wouldn't take long to kill a battery Very well could be, but it depends on how the system is wired. Every circuit (fuse outlet) has to be grounded. Ideally each is run back to...
  14. dingbat

    Only select Items 12v and 110 will work on my boat...Very puzzled

    Sounds like your back feeding the circuits through ground. Hopefully you didn't blow anything by applying power to ground Lets get some terminology straight... don't see a "bus bar" per say on the schematic. I see a power distribution panel feed by a 60 A red wire. Within that panel should...
  15. dingbat

    Only select Items 12v and 110 will work on my boat...Very puzzled

    Started reading thru this thread this morning. Very confusing.... your jumping all over the place. You need to start at the supply (batteries) and work your way back The odds of your problem being the "bur bar" is next to nil. Wouldn't spend another 10 seconds working from that perspective...
  16. dingbat

    benefits of side bunks..... are there really any?

    It blows out the ends of the unimproved (unpaved) ramps used in a lot of freshwater locations.
  17. dingbat

    Talon Remote Non-Bluetooth

    All I can say is keep checking eBay
  18. dingbat

    2024 75 Mercury outboard

    What Vessel view unit did you install? You’re attempting to install analog gauges on a digital motor. Need some sort of a convertor to get analog signals. Did you get the right harness and convertor box? Found this…don’t know if it’s any help or not...
  19. dingbat

    Identify this fuel guage

    There are some odd ball units out there, but standard Fuel Level Gauge resistance settings are: 240 Ohms = Empty 33 Ohms = Full
  20. dingbat

    Ride quality on 1999 Grady white 263 chase

    The SeaV2 hull was implement on the 26’ around 1991 or so. Made some changes to the transom in the late 90’s but nothing of any real consequence from a ride perspective Scuppers should not be an issue
Top