Search results

  1. M

    Telltale stream and exhaust water flow amounts on Yamaha 2000 200hp Saltwater series 2 stroke

    You describe how my Yamaha F150 water discharge flows. My old 2 stroke 175 had more water pressure than my 150. After I installed a water pressure gauge it didn't read at all. I was told by a Yamaha Tech the reason was because the motor ran with high water volume/ low water pressure. Maybe...
  2. M

    No water stream when flushing Suzuki DF250

    Is this the first time flushing the motor on the muffs? Can you use a tank or large trashcan to flush it? My experience with Yamaha, maybe the same with Suzuki, the larger motors don't like to run on muffs. Sounds like everything is working since it pisses while in the water. You said "plenty of...
  3. M

    What to do with old 2 stroke mix

    As others have suggested dilute it. Do you still have the 2 stroke motor? If so dilute it and use it.
  4. M

    Mariner hit lead to cdm connection

    what are: ht leads cdm's ebd dnd
  5. M

    Battery Died

    Don't go by what the boat battery gauge says. Use a digital voltmeter. Get the battery load tested.
  6. M

    First Aid Kit

    I have a basic kit with bandages, cold pack and other stuff but I add a tube of disinfectant/antibiotic.
  7. M

    Changing my boat gauges.

    "Noticed some of the gauges had what appears to be a ground and a hot wire wired together and on the positive post" I hope not.
  8. M

    2005 Skeeter ZX190 Electrical Issue

    Start tightening/cleaning all connections.
  9. M

    What is this gauge?

    I'm agreeing with the group, trim gauge.
  10. M

    What to use to prevent oxidation on fuse box terminals?

    Is there a moisture issue in the fuse box area?
  11. M

    Yamaha 25hp outboard

    When was the water pump replaced? Sounds like it's time to find another shop.
  12. M

    VHF on All the Time?

    When the OP stated "say for 24 hours" I was assuming the boat parked at home or in a slip which didn't make sense. It does make sense to have the radio on at all times while on the water.
  13. M

    VHF on All the Time?

    Why would you want to keep the radio on?
  14. M

    Battery connections

    What dingbat said.
  15. M

    Need help for which is need for Boat motor

    That's a good question, they look the same to me and the spec's are the same. Go to the store and take a look at both of them.
  16. M

    Black flakes

    It's difficult to tell the thickness of the flakes in the pictures. Are they very thin like paint or thicker maybe fan belt or rubber hose crumbs?
  17. M

    What is this pinched tube and broken tee?

    Can you circle or highlight the area you're referring to? Are you having an issue with the motor?
  18. M

    12v going away

    When you connect the wires to the blower where are your meter leads at when measuring 0V? With the blower connected connect the pos lead to the pos side of the blower and connect the neg lead to the neg terminal of the battery or to a known good ground and report back with the results.
  19. M

    OX 66 - Ran after fuel filter changes , then died starving for fuel ?

    "Noticed when I pump primer bowl I dont see fuel entering ? , for kicks removed hose just before primary filter , pumped away , should I see some fuel coming thru hose ?" Confirm that all hose clamps are tight on fuel line between the primer bulb and it's not sucking air. Check clamps on fuel...
Top