Search results

  1. D

    Dissembling a Mercury alpha 1 SE drive

    get the lower off… make sure it’s in forward as alldodge says. the carrier looks mighty corroded. Soak heat soak heat. it took me 2 weeks. there are several puller methods. I ended up making my own from a heavy flywheel puller with lengths of 8 “ flat 1/8” steel. The original puller didn’t...
  2. D

    1988 Chaparral

    Not sure anyone can help you unless you share a bit more information. Most decks rot after the transom and strings are rotted.
  3. D

    Transom Repair, Caribbean Jaguar.

    Wow you took the plunge. I’m with jbcurt….. hope you sealed the wood before installing. Is the transom flat? Picture with the 2x4’s looks like they are bowed in the center. You might have trouble mounting your engine if it’s not flat.
  4. D

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    Indeed it is! Tid bits and other fun stuff to . love the Troegs perpetual too😁
  5. D

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    She’s purrrrrrrrring! Awesome. Great news!
  6. D

    1990 Bayliner 2651 resto

    Update 12-28 Hope all had a wonder Christmas! Been a while since we posted anything. Made some progress on the starboard side motor mount. 3 layers of progressive lengths of 1700. Im using epoxy so the layup goes smooth. Tied into the transom. I used different small pieces of mat at different...
  7. D

    Voting for 2023 Splash of the Year!

    True that.. all rebuilds should be commended. I encourage those voting to go through each and every rebuild. Some challenging work and useful information is provided. Congrats to all nominees.
  8. D

    Cuddy crusier

    You will find much information on this forum. As Scott said read the sticky’s. Watch tons of videos and ask questions here on the forum. Most likely you’ve got a restore project ahead of you. Good luck
  9. D

    New project.

    Consider rounding the edges on the top of stringers with a 3/4” router bit. Glass will wrap over much easier when you get to that point.
  10. D

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    Sheared pin is always gonna mess with timing. You’ll be able to lap that flywheel in no time flat. Gonna be 50 degree’s in our neck of the woods this weekend. You might be able to sort out the engine this weekend.
  11. D

    New project.

    Looks like you’re getting after it. Getting the transom wood out is a bear. I used a circular saw set at 1/4” and made small 6” squares all over the transom. Then was able to chisel them out one by one. small steps will get you there.
  12. D

    Did you ever wonder?

    Rude indeed. This forum has helped me and countless others. Those that tap in and expect instant gratification on their issues are not patient. We live in the Amazon get it next day Society. Waiting patiently for an answer or guidance is no longer respected. JMO
  13. D

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    Go kart racing engine flywheels… just to clarify.
  14. D

    Johnson 1988 vro 225 hp fixing up a Frankenstein

    Lapping it is a 5 min job. As racerone said only a dab is needed. Done plenty of go kart flywheels. It’s easy peasy. You’ll be fine
  15. D

    1990 Bayliner 2651 fuel tank dimensions

    Getting around to pulling the trigger on replacing my fuel tank. someone asked ( quite a while ago) about the dimensions on the fuel tank On a 1990 Bayliner 2651. measurements are as follows.
  16. D

    1990 Bayliner 2651 resto

    Update 11-23 first HAPPY THANKSGIVING to all! Took some time on this holiday to install the nav light. sealed the anchor roller holes with epoxy last night. Soooo I installed the anchor roller too! Also did more prep to the motor mounts today..grinding and sanding what fun😂...
  17. D

    1990 Bayliner 2651 resto

    I’m thinking the same thoughts. This thing is heavy and bullet proof. Nav light to installed next
  18. D

    1990 Bayliner 2651 resto

    Aluminum trim back on. went with a little bigger fasteners. slow but steady progress.
  19. D

    1990 Bayliner 2651 resto

    Update 9-20 with cold temps I decided to move inside and start to put back together the bow pulpit. Before putting back on the aluminum trim, nav light and anchor roller I gave it a quick sand with 1200…. Hit it with Cutting compound and then finished with wax/polish. started chalky. here’s the...
  20. D

    1974 Chieftain 25 "Adventurer" Restoration

    Loving the transformation of the outdrive. You gonna clean up/grind the inside as well? love the pics!
Top