So last week my glass and EEEpppoxy showed up. In the meantime my cover decided to split.
So I did a 1 man show again to install a new cover.
I cut off the old crap and saved the good parts. I reused some on the boat
Next was to lay out the 30 x 40 foot tarp to have the szilver side up vs. the black. Then folded it up. Pulled it to the hull. Next I lay out a bunch of hardwood pcs like 2x4 or what I have laying around.
I hace rope attached to the scrape wood and toss it over the boat. This time I used 6 of these.
Go to the other side of the boat and begin pulling the ropes. Mostly the middle the the fronts and back. Back and forth, they don't all pull up so easy. So expect to work it a little bit.
Go back tie 1 side down then tension off the other side lightly. Too tight rips it up from rough edges.
zool stopped by to help me out..