PlayD0h
Petty Officer 1st Class
- Joined
- Apr 23, 2009
- Messages
- 326
Here’s my plate temporarily in place. I ripped off the plastic after I put the bolts in, in case anyone’s wondering what the black and white crap is, lol.
Im pretty happy, it’s nearly flush with only a few 2-4 mm thick gaps. Yet the perimeter is flush 95% around.
I’m thinking the G Flex kit is what I’ll use, although I’m not sure if some cloth would be a good addition. And if using some JB or Marine Tex to raise the hull the small bit to get it fitting near perfect. Yet I’m doubtful I’ll go to that trouble.
Im pretty happy, it’s nearly flush with only a few 2-4 mm thick gaps. Yet the perimeter is flush 95% around.
I’m thinking the G Flex kit is what I’ll use, although I’m not sure if some cloth would be a good addition. And if using some JB or Marine Tex to raise the hull the small bit to get it fitting near perfect. Yet I’m doubtful I’ll go to that trouble.