Re: hull extension in progress with picks
Re: hull extension in progress with picks
ok....found the camera......
this thread is about showing how im doing the boat....good or bad.....so this is a gellcoat fairing stage that was never supposed to happen......
the two people that are doing the hull worked on it 5 hrs yesterday....they got the plaining surface close to good.....however the side they said was done.....wasnt.....so i grabbed a long board......and went for it
first, i spray painted the hull side......then started sanding with a long sanding hand board....24 ins long and 1 1/2 ins wide.....the long board is used to straighten bumpy areas......but being only 24 ins long.....a larger distance will have dips and high spots......
i grabbed the camera after i had allready been sanding for an hour...
in this pic.....you can see the long sweeping strolkes of the longboard
here you can see some spray paint on the bow section
these photos are from back to front on the hull......
amid ships is a real crazy area with lots of wabbles caused by the electric sander buffer the took ot the hull earlyer.....
amid ships is really tough ...as im out of steam by the time i start at either the front or back of the side of the hull....
you start at one end....and with all your might.....you press the boars to the hull and in an up and down sweeping motion.you sand the hull
here is an overall view