1987 Power Play XLT-185 - floors, stringers, and upholstery

todhunter

Canoeist
Joined
Sep 15, 2020
Messages
1,311
Made some good progress yesterday.

Got most of the work done to repair the gouge on the keel. May need one more round of gelcoat today. Here's the before picture.
20211126_082408.png


Cut down the seat bases to get the seats lower so we catch fewer bugs in our teeth.
259983416_4551484284938337_5281877959094383134_n.jpg


We installed the drive.
260361821_4551484394938326_686967574195395667_n.jpg

256117134_4551485254938240_7807780088390905259_n.jpg

259921805_4551485488271550_8403156407753098922_n.jpg


And we ran it on muffs:
 
Last edited:

todhunter

Canoeist
Joined
Sep 15, 2020
Messages
1,311
Other than a final sanding, the keel is repaired. We did not try to color match the gelcoat because I am just going to put a keel guard on before next season. I'm still hopeful for a splash tomorrow afternoon. Here's some progress shots of the keel repair:

261013399_4552393554847410_9160036054135190193_n.jpg

257759136_4552394138180685_3141679922324047596_n.jpg

259619847_4552394268180672_119469298168241663_n.jpg

260661382_4552394398180659_7826883323434346906_n.jpg
 

todhunter

Canoeist
Joined
Sep 15, 2020
Messages
1,311
Officially splashed! Whew, it was a busy few days to get everything ready, but we made it. Today it was mid-50's air temp and we launched on the Tennessee River and rode around for about 90 minutes, letting various people drive and ride. We got it up to about 50 mph at around 4,000 rpm - the water was smooth and the boat handled great. Good oil pressure, temps stayed right around 140F, and a consistent idle around 650 rpm. The trim up button was giving me issues (had to use trailer button), and we did not get the trim gauge dialed in where I want yet, but I'll get all that sorted, along with the rest of the items required to have the boat fully ready by spring.

Huge thanks to all on these forums that have helped answer questions, share knowledge, and encourage during the rough spots. I was a complete newb and had never owned a boat 16 months ago.

Here are some pics, and I'm working on compiling videos over the next few days.

At the ramp:
1.png


Launched!
7.png

5.png

6.png


My wife driving her new boat!
2.png


At home, winterized, wrapped up, and parked in it's new parking spot.
3.png


Boat shop being turned back into a garage.
4.png
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Too bad the Admiral took ownership, Tod. She might let you keep her clean and gassed up!

You have been nominated in the SOTY thread. Good luck.
 

todhunter

Canoeist
Joined
Sep 15, 2020
Messages
1,311
Thanks sir! I'd be honored for her to let me do as much. 😅

...and I humbly accept the nomination. Thanks again.
 

Meames1

Petty Officer 2nd Class
Joined
Dec 14, 2020
Messages
157
Looks great ! Glad you finally got it in the water. The smiles all around are worth all the effort. Congrats !
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
Looks great, Tod.

Time for the long winter nap or you still have some time left for more boating?
 

todhunter

Canoeist
Joined
Sep 15, 2020
Messages
1,311
Looks great, Tod.

Time for the long winter nap or you still have some time left for more boating?
Thanks! Long winter nap unfortunately. It was 55F on the water yesterday, dropped to 28F last night. After the river I got it home, winterized, and threw the tarp on it.
 

Reserector_

Chief Petty Officer" & 2021 Splash of the Year Win
Joined
Oct 15, 2019
Messages
607
Fantastic job on this. I've really enjoyed following your story because you started (more or less) where I did; new to boats. Now you are an expert because you did your research and weighed all of the forum advice you were given. You are not a newb any more. No sir!
Not only that, but your drive to do it the right way the first time, and your high finish quality. It is one sleek machine. You've truly earned your ride.
Hopefully you can get through the rest of it and get it detailed out by spring.
Congratulations on a successful splash, too! Good video.
 

todhunter

Canoeist
Joined
Sep 15, 2020
Messages
1,311
Thanks Mark! I appreciate talking me off the ledge several times during the build! You were a welcomed voice of rationality.
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,570
Thanks Mark! I appreciate talking me off the ledge several times during the build! You were a welcomed voice of rationality.
we are all here to help you off the ledge...... or to push you over......
 
Top