Search results

  1. ctswf

    Removable ladder for 18' starcraft?

    Hi everyone! ​​ Anyone know of a good removable ladder and/or swim platform to fit on these 18' aluminum starcraft w OB motor? I like to fish off the back without obstruction so remove/store/install for swimming while on the water is needed. I restored a starcraft 1969 18' offshore V with...
  2. ctswf

    1982 70hp Evinrude loss of power under load, max 2500rpm

    Hello, my motor is a 70hp Evinrude outboard Year: 1982 model: e70elcnb This year it has a new issue with loss of power under load, full throttle only hits 2500rpm and 10mph. It also sounds like it's idoling a little lower than usual. It can stall on me, but mostly it will run fairly stable...
  3. ctswf

    adapter leaking on 6 gal gas tank, Evinrude motor

    Hi, I have an Evinrude outboard motor and a 6gal portable gas tank. Since recently, if the hose is not hooked up to the tank, gas spills out of the adapter on the tank (it spills out of the hole it is supposed to come out of) I guess there is a stop mechanism on the tank that no longer works...
  4. ctswf

    18' 1969 Offshore V restoration

    Whats up Andy! I popped in to your thread recently the cheiftan looks great all metal, i may have to go that route some day as my paint chipping continues, we'll see. Nice tundra too, funny i had been thinking about getting a tundra lately, opened up your page and saw u just got one...maybe we...
  5. ctswf

    18' 1969 Offshore V restoration

    Hi guys! Im still floating around! Good to see everyones still active. Proof the offshore v still operates like its 1969! Its year 4 for me, rustolium boat primer and paint is starting to chip a little, doesnt bother me yet. -Nick
  6. ctswf

    1982 70hp evinrude thermostat question

    1982 70hp evinrude I have had this motor 10 years and I have never done anything with the thermostat. I trailer it to salt water. I thought I remember reading in the past people removing or bypassing the thermostat for some reason? Anyway, is it pretty much assumed that I do have a...
  7. ctswf

    1994 225hp johnson water output pulsating / intermittent stream

    HI, The water pump was just changed on a 1994 225hp johnson and while running with muffs and garden hose, the output appears to be a bit jumpy or pulsating. Its my friends boat, we took it off again to check the waterpump and everything looks correct. However, the water tubes end got beat up a...
  8. ctswf

    What product to use to tack glue o ring on to waterpump housing?

    Hi, I have done this once before a few years back but need a little memory refreshing. Motor is 1982 70hp evinrude. I have purchased a waterpump kit w housing, what can I use to glue the large o ring "gasket" to the housing so it doesnt fall off as I slide the housing down the shaft...
  9. ctswf

    Cant remove lower unit, something caught at very end, shift rod? 1994 225hp johnson

    My friend started removing his lower unit and can't get it off. Johnson outboard 225hp 1994 I stopped by to help, it pulls all the way out, then gets stuck at the very last point. It seems like the shift rod is what is hitting I was not there when he started, I believe he tried spinning the...
  10. ctswf

    early 90s johnson 225hp, fuel filters, how many?

    Hi My friend has a johnson 225hp outboard, maybe 1994. on a used boat, he has a fuel/water separator filter in the boat (shaped like a 1lb coffee can). He also had an inline filter under the cowl. He has replaced this inline filter with one from napa, I do not know the part #. We were...
  11. ctswf

    1996 225hp johnson vro fuel pump. going to 4wire from 3wire

    hi. motor is a 1996 johnson 225hp and needs a fuel pump. in an older post it states: " 5007423 is a "kit" and 5004554 is the pump itself. This kit is used when replacing a 3 wire pump to adapt it to a 4 wire system. (the pump itself, 5004554, is a 4 wire pump)." so, my friend has ordered a...
  12. ctswf

    1994 225hp johnson tach reading high rpms

    Hi, the motor in question is a 1994 johnson 225 vro and the tach on the boat is a honda brand at idol the tach is reading 3000rpms and at about half throttle its off the gauge over 7k the motor sounds normal to me, although my experiance is limited im pretty sure its not nearly that high I...
  13. ctswf

    telltale (peehole) fitting 1996 225hp

    hi, can someone help me identify the name of this part, or what category to look in. My freind purchased a 1996 johnson 225hp vro. the actual plastic "peehole" fitting itself, the last point water exits. this plastic part that the hoses hook up to is whats needed. Sorry I do not have a photo...
  14. ctswf

    rectifier to terminal block corroded 1982 70hp evinrude

    hi, my motor is 1982 evinrude 70hp on the terminal block part#326255, marked red, there are two red wires, one to the rectifier and one to...a bundle of wires. that one screw corroded to a stud, I need a new terminal block. In the mean time can I just tie the two red wires together to see if...
  15. ctswf

    18' 1969 Offshore V restoration

    I'm still alive! I cant belive im going on the 3rd season with this boat already! boats still good. I will update with some pics soon. I have two lowrance gen 2 touch units with side imaging and some other upgrades to show. hoping to build a livewell this year long live metal! ...boats
  16. ctswf

    add drain tube/plug to a thin boat, like a canoe

    I would like to add a drain tube to a plastic canoe which is probably less than 1/4 thick walls. what would be a good way to do this, currently my thought is to buy a brass drain tube which is 1 7/8 and add a piece of wood for thickness, and just glue it all in there. for the record the boat...
  17. ctswf

    what type of gear lube for 1972 johnson 6hp

    I looked at leroys ramblings and searched online I'm not sure what gear lube to use for my 1972 6hp johnson. I have a bottle of evinrude hi vis gear lube that reads dont use hi vis gearlube for electric shifts such as johnson/evinrude 1962-1972. I'm not quite sure what that means but for older...
  18. ctswf

    1972 6hp johnson- how to determine if waterpump is working

    Hi, I just got my 1972 6hp johnson model 6R72D running well with a carb cleaning thanks to the help of the great people of this site. Its running in a bucket of water, what should be coming out of the exhaust? air and some moisture, mist, or a noticeable spray of water? I wanted to take a...
  19. ctswf

    1972 johnson 6hp orifice plug / carb cleaning

    hi, I got a carb kit for my motor and cannot get the orifice plug out l. I'm afraid I might damage it. if its cleaned very well and I can see a pinhole of light through it will that be enough? the motor is 1972 6hp 6R72D here is a diagram, its part #27 thanks
  20. ctswf

    Can't find fuel filter for 1972 6hp Johnson 6r-72d

    As the title says, I can't find the part # for a fuel filter for 1972 Johnson 6hp 6R-72D I need either a rebuild kit or if I have to buy the filter I will. The motor starts then stops right after. I plan to rebuild the carb and fuel filter/fuel lines. I was able to find the carb kit here on...
Top