Search results

  1. S

    2013 Etec Steering Question

    "installed in 2021" "warrantee until 2027" "mechanic" This does not sound like a 2013 outboard. The Gen 2 had issues with their integrated steering system. I'm thinking maybe you haven't properly identified this motor.
  2. S

    2013 Etec Steering Question

    If it's a 2013 then it's a g1 so it's just a normal steering cable or hydraulic system. Most likely it's a stuck cable and it very common. Slide hammer, heat or whatever, it wouldn't be something that would stop me from buying a motor....just might help in negotiating a price. What's does he...
  3. S

    Intermittent spark on 1976 35 HP Evinrude

    This motor probably still needs something fixed. Keep running her.
  4. S

    J30JRSIE 30 hp Outboard - Carb Question

    Just an orifice....so not sure, guess would be for another application or a cleaning function. Plug it up and see how she runs....be sure to clean your plugs first. Good luck
  5. S

    J30JRSIE 30 hp Outboard - Carb Question

    Looks like your missing part number 9 https://www.marineengine.com/parts/johnson-evinrude-parts.php?year=2001&hp=30&model=J30JRSIE&manufacturer=Johnson&section=CARBURETOR
  6. S

    96 johnson 150

    Thanks for the correction....what about the hole Race talks about.
  7. S

    96 johnson 150

    Electric fuel pump is not needed. Pump on the primer ball when testing and if it clears up then replace fuel pump. Fuel pump works on pulses from the crank case. No vacuum in there. (Piston skirts)
  8. S

    96 johnson 150

    I've heard of the lower compression commercial motors....rebuilt one at 105? Id question that but thanks for educating me.
  9. S

    Bad Miss

    I agree, clean carb....I have 4 of these motors. You can try to backflush the carb but taking it off is better. Could be the lean sneeze that Racerone is talking about....easy to test.
  10. S

    96 johnson 150

    Switch shuts down one side....so your answers are inconsistent with what is happening. Try a different compression gauge. Might want to inspect piston skirts. Remove exhaust covers. Compression Spark Fuel Did you check the firing order? Reading back you state "rebuilt the motor" your...
  11. S

    96 johnson 150

    Then you have a fuel issue most likely. This assumes your coils are properly hooked up to the right firing order.
  12. S

    96 johnson 150

    You had better re-explain. Doesn't make sense....at least to me.
  13. S

    96 johnson 150

    Well I run champions and haven't really liked the ngk's but guys on here like them and I doubt that's your problem. Never hurts to try though....cheap test.
  14. S

    CMC PT-130 Actuator dimensions

    Well I have one that I haven't installed yet and it's at my summer home that I will be visiting this weekend. Not sure what your after though. Doesn't this give you the info you need?
  15. S

    96 johnson 150

    "low compression motor" ? End of life is coming, rest is BS. Running in a barrel or muffs you won't see much difference. If you have no spark it could be a power pack but weak spark more likely coils. You need a spark jump tester....pick up one of these cheapies and look for a "zap" of 7/16...
  16. S

    96 johnson 150

    Plastic carbs parts .... Assuming compression numbers check out. "Blue spark" but how far do they jump?
  17. S

    1996 Evinrude Intruder 175GLED

    To isolate, when it's on a no start situation, unplug the main harness and jump it at the motor (solenoid). If it runs then you know it's not at the motor but in the box or harness. You will have to plug it back in to turn it off.
  18. S

    Need help with strobe timing on 1972 9.5 HP Johnson 9R72M

    How big of a barrel are you using and how long have you been running it this way? If it's been awhile since it's been under a load going full bore it will oil up pretty good.
Top