I have a perTronics ignighter after motor swap very difficult to start when it does start it will cut off within a couple minutes very weak spark at coil have tried ground in the plate in the distributor no change I have 12 V going to the coil about nine while cranking any help would be greatly...
82 mercruiser 350 carberated repower new crate motor intermittent no start.seems to be ingnition related. I have 12 v to the coil at times and about 7 volts at another time it doesn't stay consistent I have ran out of ideas any help would be greatly appreciated
hello I purchased a 20 ft boat with a disassembled 898 does anyone have clear a picture of where the throttle mount attaches . This is all I see but nowhere to attach. Am I missing another price to this?
my old pump has a threaded vent tube on the pump with a viewing bulb replace if fuel is here.my carb only has this opening as far as i can see well this work to vent my pump with a clear hose and a nipple?
Do i need to use a different spark plug wires set after a points conversion the stock wires say for points.is there really any difference? I am not sure what wires to order i am working on a older mercruiser 3.0 140 hp serial #3245055 any help would be greatly appreciated.
I have a couple questions here i have have a rattle i cant find even after a motor rebuild sounds like a loose lifter triple checked by 2 marine mechanics all seems ok first question.Is this where my shutters should be on top of this pipe?( image) my motor is in 77 Starcraft serial number...
my cam gear is missing several teeth does anyone know how to remove and install a new gear set. i cant find much information one thread says pull the motor,for the crankshaft gear and pull the camshaft for the cam gear. is this true? or does anyone have a better way.i would really appreciate any...
i have a odd noise coming form my engine.i am familiar with with rod knock and lifter noise, pinging. this sounds like none of them.i well try to get a video of the sound once i put the valve cover back on i inspected the rockers i see no problems.i used a stethoscope can not pin down the...
