Current visitors

Bondo's latest activity

Bondo reacted to Scott Danforth's post in the thread Need Assistance with Fuel Line Fitting with Like.

the one picture is a ORB port, the other is an SAE inverted flare.

Yesterday at 2:31 PM
Bondo reacted to Scott06's post in the thread exhaust manifold with Like.

yes has to be flat . you may be able to resurface them with a belt sander, bastard file, or if you have access to machine shop they can...

Yesterday at 8:06 AM
Bondo reacted to Franco_boater's post in the thread First time bellow job Alpha One Gen2 with Like.

Boat has been launched! Everything works, I’ve now nice quiet shift, before when putting in gear that was quite noise bang/clunk. Now...

Wednesday at 4:11 PM
Bondo reacted to Candy Gramformongo's post in the thread Outdrive help!!! with Like.

... or a Speedi-Sleeve.

Wednesday at 8:19 AM
Bondo reacted to alldodge's post in the thread RE: LOW FUEL PRESSURE? with Like.

Yes, just don't force, I know that's a abstract answer, but that is all we have to work with

Tuesday at 5:21 PM
Bondo reacted to Lou C's post in the thread Always check the last thing you touched….. with Like.

Ok last year had a bad season due to bad gas and found this out by running it on an outboard tank. Ok everything’s fine boat runs...

Tuesday at 2:29 PM
Bondo reacted to Scott06's post in the thread Washing out drive bellows and gimble bearing question... with Like.

you boat would have originally come with a greaseable bearing. Somewhere around 2008 ish they started using the permalube bearing, and...

Tuesday at 9:33 AM
Bondo reacted to Scott06's post in the thread Mercruiser exhaust system gaskets. with Like.

X2 on this check the mating surfaces. Some cheaper aftermarket manifolds are not flat from the factory And if they are corroded they...

Tuesday at 9:32 AM
Bondo replied to the thread Washing out drive bellows and gimble bearing question....

Ayuh,..... I agree with BD on the cause,..... I'd just use rags to do the clean up, 'n the gimble bearing, Could be greaseable, or...

Tuesday at 8:50 AM
Bondo reacted to Bt Doctur's post in the thread Washing out drive bellows and gimble bearing question... with Like.

It was running with low/no gear oil. shift into fwd, remove the drive and I suspect you will find the oil that was lost .You should have...

Tuesday at 8:44 AM
Bondo reacted to kenny nunez's post in the thread 1991 OMC Cobra 2.3L - can't reach max rpm with Like.

If your engine has a spin on style fuel filter it will be a good idea to get a replacement filter. Are the spark plugs new? A good time...

Monday at 3:41 PM
Bondo reacted to rolmops's post in the thread 1989 Cobra on 4.3 liter engine makes a funny noise with Like.

So I found out why there was this nasty noise. Last year I had problems with the gimbal bearing slipping out of place. So I took it to a...

Monday at 2:36 PM
Bondo reacted to Rranger's post in the thread 120 mercruiser noise with Like.

All good bad connection to bilge pump.

Monday at 12:06 PM
Bondo replied to the thread 1991 OMC Cobra 2.3L - can't reach max rpm.

Ayuh,..... All things considered, I'd do a compression test next,....

Monday at 12:03 PM
Bondo reacted to Lou C's post in the thread Mercruiser exhaust system gaskets. with Like.

I used these on my Barr 2 piece coversion, coated the sealing surfaces with Permatex aviation and no leaks inside.... Endoscope pic...

Monday at 11:59 AM

Show older items

Home
Members

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

Bondo's latest activity

Follow Us