Where can I find the oil filter?

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
Currently my alighment tool show the witness mark is that bottom touch the coupler more(See the pits of up and down).

Why is my understanding different from achris?

Achris mentioned following in my another thread as following,​

/************************/*
No, the engine is LOW if the bottom of the alignment tool touch more to coupler (so you need to make the front RISE), and the engine is HIGH if the top of alignment too touch more to coupler (you need to make the front DOWN).
/***************/

My understanding is

if the bottom of the alignment tool touch more to coupler, the engine is too high, I need to lower the front engine,

if the top of alignment too touch more to coupler, the engine is too low, I need to higher the front engine.

Is my understanding correct? But what my understanding is completely different from what Archis mentioned.
 

Attachments

  • left.jpg
    left.jpg
    388.5 KB · Views: 2
  • right.jpg
    right.jpg
    407.4 KB · Views: 2
  • bottom.jpg
    bottom.jpg
    517.1 KB · Views: 2
  • top.jpg
    top.jpg
    430.9 KB · Views: 2

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
Can Anybody help me read the witness of alignment tools in the attached files. it should be pushed into the end and I can turn it with two fingers. but some difficult to pull it out.
 

Attachments

  • left1.jpg
    left1.jpg
    597.5 KB · Views: 4
  • right1.jpg
    right1.jpg
    1 MB · Views: 5
  • bottom1.jpg
    bottom1.jpg
    912.6 KB · Views: 5
  • top1.jpg
    top1.jpg
    815.5 KB · Views: 5

ScottinAZ

Master Chief Petty Officer
Joined
Jun 25, 2009
Messages
831
if you can push it in to the end, and turn it with two fingers, you should be good. Removing it you are working against the suction from the grease. this is normal.
 

todhunter

Canoeist
Joined
Sep 15, 2020
Messages
1,311
Remote oil filter kit was worth the money. I ended up having to make my own bracket though, as the one that came with it was supposed to work with Mercruiser but there was no way.
 

CapriBX

Petty Officer 3rd Class
Joined
Jul 31, 2022
Messages
75
Remote oil filter kit was worth the money. I ended up having to make my own bracket though, as the one that came with it was supposed to work with Mercruiser but there was no way.
Which one did you get
 

CapriBX

Petty Officer 3rd Class
Joined
Jul 31, 2022
Messages
75
Going to put that on the spring 2024 purchase list.
 

todhunter

Canoeist
Joined
Sep 15, 2020
Messages
1,311
Here it is fitted, and also showing the custom bracket I made to mount it off the side of my elbow. Also, the last pic is more recent than the second pic - I made another bracket to better manage the hoses so they aren't just flopping around in the bilge.
 

Attachments

  • 20211002_131348.jpg
    20211002_131348.jpg
    3 MB · Views: 4
  • 20211002_140930.jpg
    20211002_140930.jpg
    2.2 MB · Views: 4
  • 20230610_075926.jpg
    20230610_075926.jpg
    2.8 MB · Views: 4
Top