Rehab SportCraft 222 1983 deep V hull cuddy walkaround

[sopwithcamel74]

Likely the cert for their website expired, so now it doesn't validate via your browser.

Short answer: it's probably fine; the site admin should be receiving notifications out the wazoo, and likely is working on it.

 

[zool]

Anyone else getting this off of us comp website?



[h=2]This site is not secure[/h] This might mean that someone’s trying to fool you or steal any info you send to the server. You should close this site immediately.  Go to your Start page Details This website’s security certificate has been revoked, so you can’t go there at this time. Error Code: ERROR_INTERNET_SEC_CERT_REVOKED

It means are banned from the site

 

[steve_h7]

Usually it's your browser security settings (might be set more strict than others here) and the USC website. If USC hasn't upgraded their site to use "https" as opposed to "http" the browser sees it as "unsecure" and evil. I went through the conversion a couple months ago with a forum I help admin on. Thank god we have an IT guy that does all the hard stuff because I know only enough to break it.

 

[kcassells]

Thank you ​

steve_h7

. I called them this morning and that's exactly what they said. ​

:joyous:

Your boat is looking good!​

I did make a verbal order. ​

So today I went back out to sand down the nubs. Lots of them to mess up the next stage of fairing then glass. ​

Originally I wanted to glass the deck prior to setting the 3 fish wells. I think it might be overkill. I was thinking the glass would go under the drop in components. They will be set in hairy PB. ​

The next glass will come to the top/vver the flanges they have. I am going to take those flanges down to/grind/feather paper thin then set.​

Any opinions?​

Chewed thru the bubs, high spots etc with 50 and 80 grit belt sander. ​

Opinions welcome. Hitting the sack for tonight's shift. Plus I ran out of propane to warm up the boat.....eeeek!​

 

[kcassells]

Went back in the boat this morning after I picked up a tank of propane and 50, 80 grit belt sander paper. Fired up the heater to take off the chill. Worked a lot of the decking for high spots, drippings and diddled with the fish wells for a better fit. Coming along.
Waiting on the cabosil and back to plan.

 

[dezmond]

Belt sander work good on the deck?

 

[chevymaher]

Went back in the boat this morning after I picked up a tank of propane and 50, 80 grit belt sander paper. Fired up the heater to take off the chill. Worked a lot of the decking for high spots, drippings and diddled with the fish wells for a better fit. Coming along.
Waiting on the cabosil and back to plan.

What were you saying to mickey. Something to do with pics I believe.

 

[kcassells]

Belt sander work good on the deck?

Dez,
Worked for me very well. I have a lot of pcs. that I need to level out where the edges meet. Like a Frankenstein surgery. Need to do this before I fair.
Chevs,
Doesn't look much diff that yesterday but I did put up some new lights so it won't look like a **** yellow portrait.

 

[chevymaher]

LOL I just foolin with ya.

 

[kcassells]

What were you saying to mickey. Something to do with pics I believe.

Yea Micky???? Did he start another boat rehab?

 

[chevymaher]

Yea Micky???? Did he start another boat rehab?

He said it was to windy to go out last I spoke with him. I think he is happy with this one. She a fine looking ship.

 

[kcassells]

He said it was to windy to go out last I spoke with him. I think he is happy with this one. She a fine looking ship.

Ahhh he's a whimp. choppy choppy wah wah wah.
Only kiddin Mick.
So been pluggin away. Cabosil is supposed to show up today.
Crap spen most today just cleaning up so I can shoot and kill for the weekend.
Pics.....left phone at work.

 

[kcassells]

Likely the cert for their website expired, so now it doesn't validate via your browser.

Short answer: it's probably fine; the site admin should be receiving notifications out the wazoo, and likely is working on it.

Was just that and they confirmed and fixed.

 

[kcassells]

So like I was saying I prepped up the area where the fish well is going on starboard side. Lots of little things to do before install.
This is where 43 oz. of hairy EEEpppoooxxxy pb got me. Snapped pic then battery went dead.
The pb was laid on the deck under the flange of the well. Outlined in marker pulled well and loaded up the butter. Basically the flange is the bond to the pb to the ply.
The angles iron I placed and located screw holes to pressure down on the top of the well. Then with the squeeze out pb ran it to a bevel like fairing. heater on, nice temps up to 70 today. Let that sit overnight and check for set up tom. before pulling up iron.

 

[oldrem]

Better have it right the first time Kevin - you'll need a jack hammer if you ever want it out

 

[kcassells]

OTE=oldrem;n10721324]Better have it right the first time Kevin - you'll need a jack hammer if you ever want it out [/QUOTE]

Thanks Eric,
It should never come out. It will be an integral deck component. Camera charged couple more pics. Setting up nicely, turned off torpedo heater.

 

[sphelps]

Good idea with the angle holding the tank down ..
Looking forward to seeing it full of fish

 

[kcassells]

Me too Sam!
Was going to use wood but the metal got my attention of being less flex and cleaner use.

 

[kcassells]

So hey....awful quiet around here lately. Everyone doing the housey, garden, wifey list? No frets I'm onto that next.
Put in the next fishwell. A little more pic on install. I think Frankenstein will be ok after I get all in and do the feathering.
Weather hit 70's low today and dry, cool beans no reason to leave the torpedo heater on.
Then clean up the boat after the mess.
This was @ 32 0z. hairy pb.

​

 

[kcassells]

Hey now....Looky here! Now it's just me but this is a chubs! So much more to do but even the Queen said it looks like progress finally.:watermelon: