Can the base of engine work? Two to bolts under engine are rusted and can

L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
How can I turn the engine manually? I found a video which show rotate the engine manually.
it is
What kind of tools is it?
 

Attachments

  • rotating_engine_by_hand.png
    rotating_engine_by_hand.png
    781.6 KB · Views: 3
Last edited:
L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
What kind of tool should I apply to rotate my engine? Thank you
 

Attachments

  • PXL_20220419_132236393 (1).jpg
    PXL_20220419_132236393 (1).jpg
    2.2 MB · Views: 4
T

todhunter

Canoeist
Joined
Sep 15, 2020
Messages
1,311
It looks like he's just using a steel bar between two of the bolt heads on the water pump pulley. If you don't want to do that, I'd recommend using something like the ProForm Crankshaft turning tool. It bolts to the harmonic balancer and gives you a hex or square drive so you can safely turn the engine over.
61ztZ8mwdUL._AC_SL1125_.jpg
 
Scott06

Scott06

Admiral
Joined
Apr 20, 2014
Messages
6,440
liusigou said:
What kind of tool should I apply to rotate my engine? Thank you
Click to expand...
Take the spark plugs out you will be able to turn it by hand on the pulley.

You need to go through retiming your engine with a timing light. Need to bring engine to TDC on compression stroke (both valves closed) on #1 cylinder. Turn distributor so that rotor points to number one post on cap. that should get you in the ballpark to start the engine if done correctly. Once running use a timing light to get it set. Timing is usually on sticker on engine or flame arrestor cover

Do you know what ignition system you have on it - if you have points it is fairly simple if you have a later Delco EST you need to put it in base mode to set the timing.

You can find some youtube videos on this
 
L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
Scott06 said:
Take the spark plugs out you will be able to turn it by hand on the pulley.

You need to go through retiming your engine with a timing light. Need to bring engine to TDC on compression stroke (both valves closed) on #1 cylinder. Turn distributor so that rotor points to number one post on cap. that should get you in the ballpark to start the engine if done correctly. Once running use a timing light to get it set. Timing is usually on sticker on engine or flame arrestor cover

Do you know what ignition system you have on it - if you have points it is fairly simple if you have a later Delco EST you need to put it in base mode to set the timing.

You can find some youtube videos on this
Click to expand...
Thank you. I have rotated the engine to the 0 point.
 

Attachments

  • PXL_20230410_124603310.jpg
    PXL_20230410_124603310.jpg
    829.1 KB · Views: 4
L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
it works after I set the timing back accrording to the video of
. Thank you everyone
 
Bondo

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
70,958
liusigou said:
Thank you. I have rotated the engine to the 0 point.
Click to expand...
Ayuh,...... That zero could be Tdc, compression, or Tdc exhaust, so you have to be Sure it's Tdc on the compression stroke, not the exhaust stroke,.....
Otherwise, it won't start, nor run,....
 
L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
How can I turn on my motor if I miss my key on the lake? I watched video on the youtube and it showed that I should connect the redline pole and yellow line pole by a wire then motor will start.
 

Attachments

  • PXL_20230522_163251600.jpg
    PXL_20230522_163251600.jpg
    2.6 MB · Views: 6
L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
achris said:
You're using non-genuine bellows. That is why you're having trouble putting them on. I used GLM bellows ONCE, never ever again. I always install anything made of rubber as genuine Merc. Bellows and impellers... Always genuine.
Click to expand...

Hi Archris,

I am trying to buy genuine bellows for mercruiser alpha one and gen I.
Could you please suggest which product are genuine? Could you please give me a link? Normally I prefer shopping in Amazon.ca.

Thank you
 
Grub54891

Grub54891

Admiral
Joined
Jun 17, 2012
Messages
6,077
liusigou said:
Hi Archris,

I am trying to buy genuine bellows for mercruiser alpha one and gen I.
Could you please suggest which product are genuine? Could you please give me a link? Normally I prefer shopping in Amazon.ca.

Thank you
Click to expand...
Quicksilver parts are the real thing. Anything else is not. You pay more but it’s better than doing it twice.
 
Scott Danforth

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,572
liusigou said:
Hi Archris,

I am trying to buy genuine bellows for mercruiser alpha one and gen I.
Could you please suggest which product are genuine? Could you please give me a link? Normally I prefer shopping in Amazon.ca.

Thank you
Click to expand...
Chris hasn't been here in years

You will only get Mercruiser parts from your dealer or a dealer with an on-line presence. Not Amazon
 
nola mike

nola mike

Vice Admiral
Joined
Apr 22, 2009
Messages
5,364
Scott Danforth said:
Chris hasn't been here in years

You will only get Mercruiser parts from your dealer or a dealer with an on-line presence. Not Amazon
Click to expand...
Amazon does sell quicksilver parts, but also a ton of junk. Ebay is another place, same caveat.
 
L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
The power tilt cannot work correctly. It can let outdrive down but cannot pull the outdrive up. Which part is bad?
 

Attachments

  • PXL_20230814_114631726.jpg
    PXL_20230814_114631726.jpg
    3 MB · Views: 3
L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
liusigou said:
Hi Achris, Did I do correctly? I bought it with following link

Click to expand...
Anyone can help me check again this gimbal bearing had hole or not? At that time I could not find a hole for grease filling, now I tried to fill the grease. and attached file is what I saw. You can click the link to see the detail of the gimbal bearing I bought 2 years ago. Maybe I have to pull it out and check it again to ensure I install the gimbal bearing correctly.
 

Attachments

  • PXL_20240612_020905434.jpg
    PXL_20240612_020905434.jpg
    3.6 MB · Views: 10
Last edited:
L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
Scott06 said:
If it is an OEM mercruiser bearing it will be sealed. Otherwise depends on what you bought
Click to expand...
Is this OEM? The link is following ,

 

Attachments

  • QuickSilver803099T!.png
    QuickSilver803099T!.png
    346.7 KB · Views: 2
Scott06

Scott06

Admiral
Joined
Apr 20, 2014
Messages
6,440
liusigou said:
Is this OEM? The link is following ,

Click to expand...
yes Quicksilver is OEM and the bearing will be sealed. Should have come with a pipe plug to replace the grease nipple in the transom housing

Quicksilver is same parts as Mercury/Mercruiser , just different branding so they can sell them outside of their dealer network.
 
L

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
541
Scott06 said:
yes Quicksilver is OEM and the bearing will be sealed. Should have come with a pipe plug to replace the grease nipple in the transom housing

Quicksilver is same parts as Mercury/Mercruiser , just different branding so they can sell them outside of their dealer network.
Click to expand...
Should I do any maintain for the sealed bearing. I tried to turn it by my hand and felt it is not very smoothy while turning
 

Attachments

  • PXL_20240612_020905434.jpg
    PXL_20240612_020905434.jpg
    3.6 MB · Views: 7
You must log in or register to reply here.
Top