I am a veteran boater and iboater, and I am thinking about buying a 17' Sea Nymph Striper CC that will need new floor and paint to be presentable. It is being used now and I will probably get it some time before Sept. 1. Is there a how-to, sticky, etc. page that gives a rundown of where to start, what to expect and how to handle the problems on what happens once the old deck comes off. I am familiar with the concept of pulling the console or at least lifting it, and unhooking controls and wiring. I am more concerned with removing the floor, sealing the hull, redecking, prepping and exterior paint. I will probably recarpet, but would like to know about bedliner type material in these boats too.
I spend a couple of hours a day on here mostly in the pontoon section and in Johnson Evinrude outboards. If you can point me a a couple good aluminum vhull resto threads I will be happy to read them.
I spend a couple of hours a day on here mostly in the pontoon section and in Johnson Evinrude outboards. If you can point me a a couple good aluminum vhull resto threads I will be happy to read them.