88 Capri Restoration (Splashed 08/2022)

88 Capri (2022 SOTY)

Master Chief Petty Officer
Joined
Aug 25, 2019
Messages
823
Congrats, always nice to see em floating again. BTW Im drooling over those boathouses in the background, I would love to have on of those but they dont allow them here anymore and the ones that exist or coveted.
There is alot of money on this lake and some are insane, I certainly could live in some of them!
 

88 Capri (2022 SOTY)

Master Chief Petty Officer
Joined
Aug 25, 2019
Messages
823
Awesome! Way to go ! congrats! A long road but worth it! Nothing beats being on the water. Love the pics. Hope you can enjoy a couple more weekends on the water. Upstate NY lakes are amazing.
I showed my wife your forum name and she said I should have been Driveway boater #1!
 

88 Capri (2022 SOTY)

Master Chief Petty Officer
Joined
Aug 25, 2019
Messages
823
Kinda boat related but I parked my boat here last year!
 

Attachments

  • 20220830_154117_compress98.jpg
    20220830_154117_compress98.jpg
    1 MB · Views: 20

88 Capri (2022 SOTY)

Master Chief Petty Officer
Joined
Aug 25, 2019
Messages
823
The splash went better than expected albeit I was really nervous because of all the work done and being my first time working on a boat.
It ran very well even with the slight stuttering at idle but never stalled, she planed out quite well and once on plane I had to back off the throttle because she wanted more but my wife said she saw us hit 38 mph at 4000 rpm which is fast enough on this small boat.
My wife finally realized that the controller needs to be replaced after watching me fight with it so I got permission :).
Not surprisingly the outdrive is noisy so I didn't do hole shots or anything like that basically just tooled around slightly above ide but of course had to experience some speed.
So as far as future purchases we are looking at a drive in better condition or rebuild, controller, distributor or rebuilding it so not really bad, but would not have truly known without getting her in the water.
Future plans will definitely some kind of work on some of the seating material, upgrading dash, gauges and adding more storage.
The worst thing I experienced with my outing was where I was launching the boat had a large hole about 10 feet off shore but no large enough for my trailer so the trailer was never level and actually had to manhandle the stern back onto it as my wife pulled the boat out.
It could have have been worse like what I witnesses a jetsier go through though:
It was brand new (Black and orange) couldn't see the make but they loaded it on the trailer but never hooked up the safety line and for some reason pulled out real fast yanking it off the trailer and totally smashing the bottom of it, pieces everywhere!
In conclusion, the story of my boat isn't finished and definitely will be posting about it :)
 

zool

Captain
Joined
Aug 19, 2012
Messages
3,432
The splash went better than expected albeit I was really nervous because of all the work done and being my first time working on a boat.
It ran very well even with the slight stuttering at idle but never stalled, she planed out quite well and once on plane I had to back off the throttle because she wanted more but my wife said she saw us hit 38 mph at 4000 rpm which is fast enough on this small boat.
My wife finally realized that the controller needs to be replaced after watching me fight with it so I got permission :).
Not surprisingly the outdrive is noisy so I didn't do hole shots or anything like that basically just tooled around slightly above ide but of course had to experience some speed.
So as far as future purchases we are looking at a drive in better condition or rebuild, controller, distributor or rebuilding it so not really bad, but would not have truly known without getting her in the water.
Future plans will definitely some kind of work on some of the seating material, upgrading dash, gauges and adding more storage.
The worst thing I experienced with my outing was where I was launching the boat had a large hole about 10 feet off shore but no large enough for my trailer so the trailer was never level and actually had to manhandle the stern back onto it as my wife pulled the boat out.
It could have have been worse like what I witnesses a jetsier go through though:
It was brand new (Black and orange) couldn't see the make but they loaded it on the trailer but never hooked up the safety line and for some reason pulled out real fast yanking it off the trailer and totally smashing the bottom of it, pieces everywhere!
In conclusion, the story of my boat isn't finished and definitely will be posting about it :)
Sounds like a good start to me, there are always bugs to work out after launch, just part of the process. I bought paddles for mine incase I had to row back to shore ;)

That hole off the ramp comes from people powering onto the trailer, which is frowned upon for that reason.
 

88 Capri (2022 SOTY)

Master Chief Petty Officer
Joined
Aug 25, 2019
Messages
823
Grats on the splash!

As you use it more, your list is gonna grow as to adds/changes.
I totally agree, the strange part is that thinking about upgrades, future repairs and not being consumed on what's broken or having a time-line in your head about the splash!
 

88 Capri (2022 SOTY)

Master Chief Petty Officer
Joined
Aug 25, 2019
Messages
823
Hi all, I posted this on the OMC forum but wanted to add it to my rebuild thread so sorry about duplication 😊.

Well....
I disassembled the lower gear case and everything looks good other than it was way past time for seals.
I did this because I had horizontal play to an 1/8" maybe 3/16" and the prop could be rotated a good third of a turn when in gear.
I also had it jump out and back into gear once when on the lake.
I did come to find out that the shift rod is adjustable which I didn't think it was because there isn't a nut under the fork like some other models I have seen pictures of.
I did notice that the prop bearing housing may not have been seated all the way in by a paint line still visible before the embossed area on the prop housing.
Does anyone have any thoughts on any of this? I'm all ears! .
 

Attachments

  • 20221029_120823_compress20.jpg
    20221029_120823_compress20.jpg
    1.3 MB · Views: 7
  • 20221029_120730_compress28.jpg
    20221029_120730_compress28.jpg
    629.7 KB · Views: 6
  • 20221029_120641_compress59.jpg
    20221029_120641_compress59.jpg
    1,000.5 KB · Views: 6
  • 20221029_120629_compress79.jpg
    20221029_120629_compress79.jpg
    1.1 MB · Views: 7
  • 20221029_120920_compress64.jpg
    20221029_120920_compress64.jpg
    898.8 KB · Views: 7

jbcurt00

Moderator
Staff member
Joined
Oct 25, 2011
Messages
25,047
Best to track that thru the OMC forum, and avoid duplication here
 
Top