1989 wellcraft 230 coastal I/O fiberglassing

[ltfella]

Ok so I’m almost there I know I need about 6 layers of 1708 for my 1/4 “ l fiberglass. Can I do all of the transom first or I’m I better to lay one or two rows all the way around the transom and stringers so I don’t have a large sectin of 6 layers underneath the next section.

 

[Drivewayboater2]

I believe should finish the transom first. all rebuilds I’ve seen have the transom completed and then lay up the stringers to the transom. Structural integrity for the transom assembly is priority.

 

[ltfella]

Have 23’ wellcraft coastal I/o. Can I lay 6 layers of 1708 for my 1//4 inch or should I switch cloth between layers if so what kind. Redoing my whole inside transom

 

[jbcurt00]

1708 is 2 layers, 17oz biax w/ CSM stitched to it

 

[ltfella]

1708 is 2 layers, 17oz biax w/ CSM stitched to it

So 2 layers 1708 then csm then 2 more 1708 and so on

 

[jbcurt00]

No the 1708 IS 2layers

 

[ltfella]

No the 1708 IS 2layers

So 1708 csm 1708 csm

 

[jbcurt00]

1708
1708
1708
Until you get 1/4in

 

[jbcurt00]

Have you read thru

1961 Lonestar Flamingo - SPLASHED w/Pics

Re: 1962 Lonestar "Flamingo" - I finally Started w/pics Re: 1962 Lonestar "Flamingo" - I finally Started w/pics Heal........ 1st Play......... 2nd Work............................................................. When you just gotta. Hope you get feeling better soon. Meds and rest is the...

forums.iboats.com

Lots.of helpful info in here, take a look around