sphelps
Supreme Mariner
- Joined
- Nov 16, 2011
- Messages
- 11,451
I got the outer chines all cleaned sealed and re-fastened on . I bedded all the joints in with Mahogany 5200 . Had to install the lift ring at the transom along with the support boards for the rudder and shaft strut bracket .
I had to order some more large SB screws for different things . Most of the bolts and nuts/washers I was able to clean up and reuse .
While waiting on the fasteners I need to build a cradle to lift it up high enough to climb under it . I'll need access when I start the bottom ..
I really need to clean and organize a bit also .. The place is a mess . LOL !
Hope everyone had a nice Labor day weekend !
I had to order some more large SB screws for different things . Most of the bolts and nuts/washers I was able to clean up and reuse .
While waiting on the fasteners I need to build a cradle to lift it up high enough to climb under it . I'll need access when I start the bottom ..
I really need to clean and organize a bit also .. The place is a mess . LOL !
Hope everyone had a nice Labor day weekend !