Search results

  1. Rayzor

    1981 Merc 40hp head cover

    The head cover is dripping water on my spark plug. I ordered a new gasket, but is there a paticular sealer I should use? Also is there anything I should be wary of when doing this? Looks strait forward.
  2. Rayzor

    Merc 40 blue band wiring

    I just removed a failed 1973 merc 500 off my starcraft. The control wiring has a 7 solid color code harness. The newer motor has a 8 color harness some with stripes and so forth. Can someone help me wire in this 40hp please. I have not been able to determin its age or find a matching schematic...
  3. Rayzor

    Re Re sealing merc 500 lower unti

    I put all new seals and o rings in the lower unit on my 1967 merc 50 hp. After a brief run around the lake my reward is milky oil. So made a psi tool and put 10 pounds to it. The leak seems to be coming from the large O ring that seals the prop bearing carrier to the case. Now when I put all...
  4. Rayzor

    Need a new prop for old 50 merc. Where?

    Been searching all day for a prop for my 1967 Merc 500. I cannot seem to locate anyone that has one for this vintage. Here on Iboats they start at 1974 and up. Any ideas?
  5. Rayzor

    1967 Merc 500 shift cam

    Re: 1967 Merc 500 shift cam Hmm, I have turned the shaft to engauge forward gear as thats where my controls are set. Im not sure what you mean by the reverse ramp facing the drain plug side. There are two ramps on the rev lock cam. Help! :)
  6. Rayzor

    1967 Merc 500 shift cam

    I had to reseal the lower unit on my 50 hp. I made the mistake of not marking the shift rod and cam to put them back exactly in place. How do I retime it all so the shifting will be correct. Thanks
  7. Rayzor

    Adding a bow tank to 16ft. holiday

    So I got a nice 20 gallon bow tank and all the hardware from a parts boat for free today. It fits like a glove up front so mounting it all will not be a issue. I am wondering if the 11-12 feet of fuel line is going to be a problem for my outboards to draw from though. I plan on using 3/8 marine...
  8. Rayzor

    67 merc 500 plugged tattle tale revisited

    So I have been messing with this new to me 1967 Merc 500 for a month now. Got it bolted on the boat and it starts and runs fine. No water was coming from the tattle tale while running in a barrel so I changed the impellar. Well that did not help matters as still no water. It tried wire, weed...
  9. Rayzor

    Pulling tube with OB starcraft

    My 16 holiday is setup with a 50HP merc and 4 horse kicker outboards. Everything on it speaks fishing boat. My wife decided to buy a float tube and has plans of me pulling her and the kids around in glee. Sooo, What do I need to hook it to the boat without ripping the transom off?
  10. Rayzor

    How to unplug tattle tale.

    I bought a Merc 500 50 horse (1967). It starts and runs perfectly but was not throwing any water stream out the tattle tale. So I just replaced the impellar and tried and tried to get the line to blow threw. The old impellar was not in terrible shape and had not come apart inside. I tried...
  11. Rayzor

    1967 Merc 500 steering

    I bought a clean 67 merc 500 to run on my starcraft. It has the morse single cable mounted threw the tilt tube. The problem I am having is finding the rod that goes from the cable to the steering arm. Any ideas where to get one? A picture would help as I already bought a link arm for 75 bucks...
  12. Rayzor

    1973 stringer 120 oil change help

    I just bought this 1973 sea swirl so its all new to me as are stern drive setups. I want to check/change the gear case oils but Im a bit lost. I have the type C stuff for the lower electric shift so thats not a issue. But what do I use up top and what screws are what? Also, I checked the tilt...
  13. Rayzor

    1973 120 electric shift controls

    So I bought a 73 Sea swirl with the 120 hp stern drive. Its not shifting so I dug in and discovered the switch in the controls is destroyed. Came out in chunks. Anyways, from what I have seen this is not the cheapest switch on the block, so I was thinking about running 3 toggle switches. Mostly...
  14. Rayzor

    1957 18hp fuel pump conversion issues.

    I followed this article "http://www.duckworksmagazine.com/05/columns/max/5/index.cfm" to the letter to convert a new to me 1957 18 to a fuel pump. So I took the boat out with it for the first time. Mind you it ran great in a barrel for an hour prior to this. I left the ramp and took off for...
  15. Rayzor

    Can anyone I.d These old motors?

    I was told they are Johnson but not sure of what vintage. Any guesses?
  16. Rayzor

    My boat is sinking

    So I took my 16ft SS out the past 2 days trying to get the bugs worked out. Both times I was in the water maybe 2 hours tops. When I come up the ramp and pull the plug I am draining at a guess 10-15 gallons. I cannot find any damages on the hull that would leak. How do I tackle this issue...
  17. Rayzor

    Old 62 Bigtwin 40 needs a tach

    I am wanting to re prop my boat and need a tach to help tune in. Is there one available that will work with the mag style ignition? Thanks for any help.
  18. Rayzor

    Just sharing a pic of my new power

    Well i struck a deal with another Iboats member for this 40 horse. We spent all day yesterday re sealing the lower unit and converting it long shaft. Spent alot of time drilling out snapped bolts as well. Anyways, its a 1962 Lark Iv 40 horse and it purrs like a kitten. Cant wait to get it on the...
  19. Rayzor

    40 horse on 16SS

    I took the 80 horse V4 off my boat (16ft. SS). Had a change of heart about running it as I want to run my kicker off my transom and there was not enough room. I was offered a honey of a motor. Its a old 1962 evinrude 40 horse lark Iv that is all re sealed and tuned etc. Will that be enough motor...
  20. Rayzor

    1967 80hp Evinrude ignition wiring

    I am at the point of wiring up my boat and need a wiring schematic for the ignition switch and choke. Anyone have one handy? Its a 67 man shift 80 hp evinrude. Thanks.
Top