Search results

  1. R

    2008 F250 no fire on port side HELP PLEASE

    Yea I know. I can dig up a compression tester. But I sort of doubt that's the issue for 3 cylinders not firing at all .. all on the same side. I'm going to do a compression check in the morning just to rule it out.
  2. R

    2008 F250 no fire on port side HELP PLEASE

    Very slow idle. Sounds labored. Pulled injector wires one at a time on the port side make no difference. Starboard side seems fine. Tested for spark?... yes.... tested for fuel?.... yes...I see fuel spray out of the injectors when I pull the fuel rail. ... test for compression?... no I didn't...
  3. R

    200HP FICHT oil issue I'm STUMPED!!!

    Sorry didn't see this until now. That would be fantastic!! I'll PM you
  4. R

    200HP FICHT oil issue I'm STUMPED!!!

    Well here's the thing. My original EMM didn't give any no oil codes it just would run for a few seconds and shut off. I replaced with a newer EMM I replaced all the oil components only to find out I'm pretty sure the reason for the no oil warning is the replacement EMM I got on ebay is from 2002...
  5. R

    FICHT EMM question

    I have a bad EMM. Years ago when I bought the engine used I bought several spare parts one of which was a used EMM. The stock one on my 2000 /200HP is # 586484 The spare I have is 2002/ 225 # 586724 I tried to use the newer one to replace my bad one and I think it would work however because they...
  6. R

    200HP FICHT oil issue I'm STUMPED!!!

    Yea... and replaced the entire pick up assembly. But no codes. I think my EMM is shot.
  7. R

    200HP FICHT oil issue I'm STUMPED!!!

    any thoughts on how I'd check that?
  8. R

    200HP FICHT oil issue I'm STUMPED!!!

    Do you mean IS there a restriction or are you saying there is one by design?
  9. R

    200HP FICHT oil issue I'm STUMPED!!!

    Does the oil pressure 'sensor' not just detect ON or OFF ohms but pulses as well??
  10. R

    200HP FICHT oil issue I'm STUMPED!!!

    2000 200 hp. NO oil warning. Buzzer and dash light. Checked oil is in the tank. Checked oil primer ball was hard. Disconnedted oil line from oil tank to oil lift pump and squeezed oil primer bulb... oil came out. I replaced the oil lift pump. Same problem. I diconeccted the return line and...
  11. R

    XD100 oil

    Yea I use it in my FICHT great stuff!
  12. R

    XD100 oil

    Great thanks for the heads up
  13. R

    FICHT oil injector

    This is on the injector itself?
  14. R

    XD100 oil

    I have a 70's Johnson 15hp. Is it okay yo use the better XS100 oil for the oil mix? I ran a tank through and it had no smoke and not a hint of fouling. But... now it has occured to me perhaps for reasons I don't understand it might not be a good idea?? Anybody know?
  15. R

    FICHT oil injector

    I rebuilt my 2001 200HP FICHT completely. New pistons, bearings, etc. I had a ring get stuck..broke.. scored a cylinder. That's why I rebuilt it. Anyway... I would REALLY like to understand something here... I know if the oil lift pump stops working I'll get a warning... if I run out of oil I'll...
  16. R

    Ficht Oil Injector

    I know this is a very old post but I rebuilt my 2001 200HP FICHT completely. New pistons, bearings, etc. I had a ring get stuck..broke.. scored a cyclinder. That's why I rebuilt it. Anyway... I would REALLY like to understand something here... I know if the oil lift pump stops working I'll get a...
  17. R

    2000 200HP Ficht oil injection question

    Well the 'thing ' Oil Manifold & PDS Assembly doesn't pump the oil it just distributes it... that was kind of my point. I know the oil lift pump has a sensor on it and if it stops pumping oil the buzzer goes off. But if the last thing in the chain the manifold and PDS assemble stops working I'm...
  18. R

    2000 200HP Ficht oil injection question

    Yes I wish I had a service manual... short of that I wonder if somebody familiar with this system could answer this... The oil lift pump works off crankcase pulse correct? So that single wire that goes to that pump that is for the warning system correct?? So if a diaphragm breaks or the pump...
  19. R

    2000 200HP ficht getting rebuilt .020 over

    My Ficht broke a piston ring.. port side top cylinder. Got it apart... looks like too many years of trolling and no decarb seized a piston ring.. I'm having it machined out to 3.874 for 20 over pistons. Can anybody recommend a source for a rebuild kit? I see some on ebay.. pistons, bearings, all...
  20. R

    idle surging

    I have a 2001 200hp FICHT. I’ve had it for about 5 years always fired right up. Only thing is it's always surging at idle. Like up and down in RPM 2-400 RPM or so. It’s like one cylinder maybe two cuts and out. I’ve seen several videos of the engine it seems others have had the same issue. A...
Top