Search results

  1. J

    opinions..pictures

    I'd have to check. um, using my gear head knowledge, the air filter sits on top, like a carbureted car....no hose to an airbox. It wasn't an in depth pre purchase, just stopped to look as it was on my way to my marina. A couple of "flags". boat has been on the market for a while. I know because...
  2. J

    opinions..pictures

    It a 240 sundancer, so I know some think that's kinda low, but It just mainly would be 2. Maybe rarely more. there is a grayish/tanish semi crusty discharge showing around the water inlets on the lower case.. Wouldn't know if that's normal or not. The manifolds have been replaced. The reason...
  3. J

    opinions..pictures

    I understand that. Which is why you hire an inspector. But there are people on here who have been around boats for eons and are capable of offering valid opinions just by looking. still can't ad pics, so doesn't matter .
  4. J

    opinions..pictures

    hmm...can't add pics
  5. J

    opinions..pictures

    The outdrive is a bravo 3, on an '06 sea ray. supposedly 300 hrs. Not many pics, I know but couldn't see any other areas to question. engine (5.0) compartment is very clean, well maintained....there are no grease, rust or oil stains. So , see anything ? good/bad.
  6. J

    Changing props. What one to get?

    that has not been my experience. Same boat, load, conditions. Regardless, speed was 3 mph lowest to highest.
  7. J

    Changing props. What one to get?

    assuming nothing is wrong...including a waterlogged boat, as implied. You didn't say what you are trying to do. props aren't miracle workers. You can fine tune, but usually trade speed for torque. Your 800 rpms from max WOT. So you can drop 1 inch in pitch and get the rpm's to 5300+/- ? , at...
  8. J

    need a new prop ?

    I can't tell you specifically what you may need. That's going beyond my knowledge. I don't know what props fit that motor, or if yours does. My thrust washer only fits one way as it has a beveled hole to match the shaft bevel. My thrust washer has a flat that fits into the plastic prop hub, so...
  9. J

    Best way to gain a little speed with 40hp engine

    just because a tach has a 7000 rpm range, that's not an engine's rated limit.
  10. J

    karavan sure lube axles, nice.

    It is not, I agree. My grease , however, didn't turn to muck. The water was actually separate from the grease. Pushed it out and made drops of water. Maybe it's the grease I use and I have researched this stuff like crazy. Also maybe it's my maintenance as it gets a fall and spring shot and ...
  11. J

    Best way to gain a little speed with 40hp engine

    oh yeah...go fast, burn gas. I wonder if enough air could get under that toon and flip it at speed.
  12. J

    karavan sure lube axles, nice.

    Sure lube axles on my dual karavan trailer really make maintenance easier. I trailered my pontoon from the chesapeake bay slip I'm in to Lake Raystown in Pa. So multiple dunkings. Got the grease gun out at home before heading back to the slip and was able to force the water out of each spindle...
  13. J

    Best way to gain a little speed with 40hp engine

    so if your max throttle rpm is 5500, at 5300 you're kinda there. ya wanna go fast? Get one of these. lol
  14. J

    Best way to gain a little speed with 40hp engine

    propping...It depends...and can get expensive.....I'm not one to steer anyone to a particular prop or what exact pitch you have to get. I can give you what I've learned and experienced. Engines have an operating rpm range, my mercs are 5-6000. You need that knowledge, After getting my new 115...
  15. J

    Best way to gain a little speed with 40hp engine

    The 60 hp, merc, big foot, 4 stroke, efi, pushed my '06, 24' twin tube pontoon at a max of just under 21 mph on a cold, late winter day, just me. The same boat gets about 26 mph under similar conditions with a 2021 merc, 115 hp, CT @ 5800 rpm. With a one pitch lower prop, my rpm can touch 6100...
  16. J

    Best way to gain a little speed with 40hp engine

    everything above is correct. I'll add: you didn't say what your WOT rpm is currently. If you're at max rpm, then maybe reducing the pitch by 1 inch MIGHT get you an increase of 1-2 mph. Emphasis might. Torque is a measure of how much work you are doing (pushing a boat) HP is a measure of how...
  17. J

    Depth Finders?

    I have this. It has map, route, nav, waypoint, go to , depth shading, gps, depth, speed, compass, etc. I'm using it on the chesapeake and just got back from Lake Raystown, Pa. I don't fish. It's exactly what I need and really like it. I think it's one of the cheaper ones with Maps. I did have...
  18. J

    The Lake will never be the same again

    yeah, jeez......tourists bring more than kids... it's called money.
  19. J

    I am starting to believe some of the global warming in N J.

    I wonder what the temps were in New Jersey in the 1500's... or 1000 bc..🫤
  20. J

    I am starting to believe some of the global warming in N J.

    It's summer, relax.
Top