Search results

  1. Dukedog

    Engine ID

    ya gonna haft ta show me.. 89 up was a drop on cowl for all merc's...... we talkin' 'bout a clam shell.
  2. Dukedog

    Engine ID

    tha only clam shell's that had vents were tha XR2 (maybe, don't remember for sure?) and XR4 which continued with tha XR4 drop ons.. all others were blank... last year of tha clam shell was '88... that style trim/clamp came out in '84...... but if you look at tha tiller arm it may be a little...
  3. Dukedog

    Engine ID

    look in this area, port side, on tha block half.. that's tha timing arm in tha picture.. tha date (06 28 90 on this one ) is stamped at tha base of number two cylinder.. some are a lot harder ta read but its there... tha clamp and trim is at least '84 or newer..... also on top of tha block...
  4. Dukedog

    97 Mercury XR6 alarm problems

    that sensor should not close/alarm till motor is about 200+/- degrees so no doubt if motor is hot or not... that little heat gun from HF is well worth tha investment though.. on your motor, on tha starboard side justa above tha switch boxes, jus to tha left of tha start solenoid there is a...
  5. Dukedog

    97 Mercury XR6 alarm problems

    did it get all tha oiler stuff removed??? ie: pump (proper block off kit), tanks, pressure valve, module... if tha module is still on it and has power to it that could be a problem... if all those items are removed and you still get a constant beep for no apparent reason (over heat) then you...
  6. Dukedog

    1998 Mercury 200hp block/part identification

    its tha small numbers in tha second picture but looks like it was one of girls or one of tha weak guys doin' tha stampin'.......... November 2nd ????
  7. Dukedog

    1998 Mercury 200hp block/part identification

    date should be on tha "block half"..... same half as tha "CC"...
  8. Dukedog

    1998 Mercury 200hp block/part identification

    there is a thermal valve in tha starboard head with 2 bibs.. some get rid of it.. why i don't know???.. its right below tha plug for number 3.. if its there it will have two bibs.. one will ne naked and tha other with a hose goin' to tha open bib on tha bottom carb... it richens up idle circuit...
  9. Dukedog

    1998 Mercury 200hp block/part identification

    are tha 34's not on your motor now?... tha 34's are for a 200 so will work fine... look like ya might wanna clean n kit 'em ta be safe.. last year for wmh's was '95 for parts reference.... tha "CC" is a factory code number.. stamped on tha block half by tha timin' arm.. there should be a build...
  10. Dukedog

    Mercury 1977 200HP with exteral Trim/Tilt motor inside boat mount.

    Moreland hose on Long Island. Reach out to Billy.
  11. Dukedog

    1998 Mercury 200hp block/part identification

    don't fret to much 'bout it being a 175 block.. best i remember tha only difference in it and tha 200 is it has exhaust (idle) relief slots in tha sleeves..
  12. Dukedog

    1998 Mercury 200hp block/part identification

    tha "CC" stamp tells its a 175, probably carb original.. look on tha linkage side of tha carb.. should be some numbers like those on tha one in tha picture.. not necessarily same as those but numbers of some kind... will be a number then - 1, 2, or 3.. top middle and bottom
  13. Dukedog

    Black Max 200 EFI ticking noise

    last internal "tickin'" noise i had in one turned out ta ba a piston "skirt".. had a micro size crack in tha bottom.... all i got.
  14. Dukedog

    1987 Mercury 2 Stroke Steady Beep

    correct............. oiler should be oscillating beeps.. anything related ta oil should go thru a module to make warning oscillate......
  15. Dukedog

    2 Strk Carb 1990 Merc 175 - not starting when hot - warm - 30 min wait starts fine

    ha!.. thats jus one of tha reasons they call us "ole guys"... we do more n more stupid ****.. glad ya figured it out..........................
  16. Dukedog

    Help with ID of mercury motor

    1982 Outboard 40 [EL]
  17. Dukedog

    2 Strk Carb 1990 Merc 175 - not starting when hot - warm - 30 min wait starts fine

    is tha primer blub soft when it won't restart?
  18. Dukedog

    1997 Mercury 200

    serial number?.. i've got a pdf oem manual for it.. send email addy..
  19. Dukedog

    1997 Mercury 200

    here ya go............ used bolts torque ta 35lbs... DO NOT add tha extra 90*.
  20. Dukedog

    175 2 stroke wont rev past 2k

    i've never had one do it but think i've heard they could possibly.. never change one switch box one at a time.. always both.. a bad bias on one can mask a problem with it and/or cause a good one ta goo bad.....
Top