Search results

  1. W

    Starter mounting bracket stud in front mount broken out casting

    I think they might, but the part numbers are different when looking at the drawings. Webekin.
  2. W

    Starter mounting bracket stud in front mount broken out casting

    I have another starter, with a better starter gear, I will install it and see if it will work with only 2 bolts to hold in place. Thanks, Webekin
  3. W

    Starter mounting bracket stud in front mount broken out casting

    Like that idea, recoil starter, recoil hood, and good to go. Sounds simple, thanks, Webekin
  4. W

    Starter mounting bracket stud in front mount broken out casting

    Glue, = J B Weld. Used high temp 2 part JB weld, with overlay of regular JB weld. Best adhesion was the regular JB weld, not impressed with the high temp JB weld. Webekin
  5. W

    Starter mounting bracket stud in front mount broken out casting

    I should post a picture, the bracket has damage, + previous owner drilled out the bracket hole, to 1/4 20bolt size. And the mounting stud was removed, drilled/tapped to 1/4 20, thus weakening the area, and broke open the casting. (crankcase). Considering rebuilding damaged area with aluminum...
  6. W

    Starter mounting bracket stud in front mount broken out casting

    Stud # 3, part number 0308354 Evinrude. I would replace the 0396194 - CYL. & Crankcase ASSY. if I could find a used replacement. Affordable. I have 3 35hp Evinrudes, and Johnson units but can't see the parts interchanging. Webekin
  7. W

    Starter mounting bracket stud in front mount broken out casting

    E25TECCA 25hp electric start unit, mounted on a 16 foot boat purchased for my Grandson to duck hunt with. Bought at auction, "starting running good used boat", visited with previous owner after the auction, watch video of boat on lake. Long story, home lower in tub of water, starter spins up but...
  8. W

    Convert Bass tracker into a Catfish boat

    Ok, I'm not in a hurry, have a 16' Landau that I removed the 35 HP remote steer, and all the bass seats, the small live well is there but used as storage. Seating is 360 degree swivel chairs used in hunting blinds, and can be placed anywhere after dropping anchor. I really like the open floor...
  9. W

    Convert Bass tracker into a Catfish boat

    So I have found a 17' Bass Tracker Texas Tournament aluminum boat for a reasonable price. It has a single console for the driver and has a passenger seat. Platforms front and rear. My preference for a catfish boat is no decks, solid floor, front and back. A small front deck is ok for trolling...
  10. W

    Wizard Western Auto 6602 A47 7hp different electrical power source than I've seen

    Thank you, Webekin
  11. W

    Wizard Western Auto 6602 A47 7hp different electrical power source than I've seen

    So Purchased this Wizard at auction very cheap only bidder, friend wanted it but turns out best that I got it due to issues. Removed the carb, and it is missing the fuel pump, rubber balloon that pulses to move the fuel. Also missing a screen that filters fuel at the carb inlet, and also another...
  12. W

    Son's 1984 Evinrude 4 hp 2 cylinder fires might run or not

    Son adjusted the carb as instructed and 3 pulls it started and idles much better. Thanks for the info. Webekin
  13. W

    Ted Williams idling bad drive shaft

    I'm back, so failed to align the what to clutch so no prop rpms. Removed the lower wife help me align the water tube and the threaded part of the clutch was off, so placed it on the shaft spline then, with the water tube aligned turned the prop to thread the shaft into the clutch. Back to the...
  14. W

    Son's 1984 Evinrude 4 hp 2 cylinder fires might run or not

    If it starts, it runs high RPM's, most times it fires then dies. Any ideas why it would run fast, and\or not idle. He had a local mechanic work on it but he did not get it running like he would have liked. Open to suggestions, Webekin
  15. W

    No spark on 35hp 1978 Evinrude outboard

    Thank you, Webekin
  16. W

    No spark on 35hp 1978 Evinrude outboard

    Ok, so if we get spark, we have the lower off, the exhaust was plugged, could we attempt to start the engine just to see if it will fire? Would not let it run any length of time, due to no cooling. Webekin
  17. W

    No spark on 35hp 1978 Evinrude outboard

    To be sure, 2 pictures front and back of CDI. Thanks in advance, Webekin
  18. W

    No spark on 35hp 1978 Evinrude outboard

    Ok. Will do, anything else to look at if that does not fix it. Webekin
  19. W

    No spark on 35hp 1978 Evinrude outboard

    So grandson has an Evinrude 1978 model 35hp electric start, and we have no spark. Tested the tester on another engine and it is functioning properly. What would be the cause for no spark, when the system is electronic? As in no points, condensers, would this be considered CDI? He has tested...
  20. W

    Stuck float ??

    Issue resolved! Running great. Webekin
Top