Search results

  1. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Had a couple hours tonight after work to get the ends of my bow seat bases completed. I cut these out a day ago. First I Did some final scribing and trimming on the wood. I added cleats to attach the panels. The cleats got a drink of resin as did the edges of the panels. I added 1/4" UHMW...
  2. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    All cleaned up.....cleats installed, cut edges given a drink of slowkicking resin, final adjustments, glued and screwed. Screws covered with left over hairy PB.
  3. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Finished up the tabbing on the bow seatbase. That was more of a PITA than the first tabbing. It's hard not to wear the resin when you're tabbing in confined spaces. Once that was all done and kicking I started laying out the top for the seat base. I decided to make it two pieces so it's easier...
  4. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    One of the other things I did yesterday while waiting for resin to kick was to sand the gelcoat on the transom. This gelcoat is so thick that it never levels. The end result looks very much like an anti-slip surface. Unfortunately this is not the look I'm going for on the transom. Before...
  5. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Got a lot done today. I love days off! I assembled the three bow pieces I cut last weekend. It was hard to keep everything straight and level. Scissors jacks, c-clamps, welding clamps and angle iron, oh my! I kept all the wood off the deck 1/4" with UHMW tabs. This way I can make sure I get a...
  6. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Close up of the transom gelcoat. I fiberglassed and gel coated the inside of the keyhole and cutout for the steering arm.
  7. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Two more coats of gelcoat on the transom area. Five coats on the exterior transom, four coats on the inner. Last coat with surfacing wax. Tabbing complete on bow deck. Cut all the supports for the bow seats. Glad I was able to save patterns. The secret of my success. Fiberglass coated...
  8. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Lots of detail and prep work. Smoothed out fillets on bow deck and laid down a layer of CSM tabbing. Glued down support beams over fuel tank. Two coats of gelcoat on the transom inside and out. Dressed up the motor mounts more and faired a lot of areas that needed it. It's a long process to...
  9. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Thanks sir. Got some more glasswork done on the motor mounts. Corners complete, and deck tabbed. Also improved the fillets around the bow deck.
  10. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    2 layers of 1708 on the flat area the motor sits on completed tonight. A total of two layers of 1.5 oz CSM, and two layers 1708. I would have finished tabbing but things get very sticky, very quick. Hopefully will be done with the motor mounts tomorrow.
  11. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Got a little bit done tonight. Prepped the motor mounts for some glass. Needed to improve a few of the fillets and grind some nubs smooth. While the fillets were kicking I mixed up some hairy PB and glued in the bow plywood with fillets. After that I put two layers of 1.5 oz CSM on the tops of...
  12. Baylinerchuck

    Deck hatch recommendations

    Anyone have any recommendations for boat hatches. I am looking for white plastic hinged type. The hatches will be walked on so latch handles need to be flush. Obviously they need to by sturdy, and not pose a tripping hazard. I am currently restoring a boat that has a ski locker. I moved the fuel...
  13. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Thanks sir.....I don't ever want to this again, seal it right and forget it. I finished the bow section today. Made more PB with a little hair to glue it down. Seven screws held it fast. I should have taken a picture of how I did this myself. I put the piece of ply wood in place. I used some...
  14. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Cleaned up the top of the bow deck. Made some slow kicking resin to seal the edges of the deck. Screws some cleats to hold the deck in place and gave them a drink of resin. Waiting for everything to kick.
  15. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Started out capping the ends of my motor mounts, bedding them a little better, and glueing in pipes I installed yesterday. I installed an aluminum tray to keep my fuel fill tube from sagging prior to foaming. I installed a new fuel fill line and a new vent. I also cut the fiberglass coated...
  16. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Thanks Ted. I actually used hairy PB to seal the holes for the conduit and pipe. I had some bedding to finish up with the motor mounts and had a little left over.
  17. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    I temporarily installed the inner transom plate to get some accurate measurements for the motor mounts. After some trimming and a few modifications I glued them in place with hairy PB. I used a scissors jack to clamp them in place. I decided to install a piece of 3/4" CVPC and 1/2" conduit...
  18. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    A few small odds and ends tonight. I fit the gimbal housing back on the transom just to check fit. Like a glove. I sanded and put two layers of 1708 on the cut out. I cut the keyhole just a hair big, so closing it up and sealing it sounds like a good idea. I wrapped plastic around some 1/2"...
  19. Baylinerchuck

    U-joint bellows

    I'm just curious, my Alpha I gen I has worm gear clamps on both ends of the u-joint bellows. I have seen a lot of instructions for drives that have the compression ring on the bell housing side of the bellows, but not much for what I have. 1. When did the change to the compression ring take...
  20. Baylinerchuck

    Chaparral 2000 SL Sport floor, and more?? [SPLASHED Sept 2017]

    Ok, two more coats of gel coat. So that's a total of 2 coats with out wax, last coat with surfacing wax. Once it kicked, the gel coat feels silly smooth. Very pleased. No pictures of that since it's white, like yesterday's pics. I also worked on cleaning up the gimbal housing. There was a lot...
View older results
Top