Wire Diagram mercury 650 1963

MA916870

Cadet
Joined
Mar 21, 2023
Messages
15
Having a hard time finding the correct wire diagram . It seems simple however someone's done some work and I want to get it rite . Any help would be greatly appreciated . Serial # 1598418 . 1963 650 Mercury outboard . Thanks .
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,574
It is in the mercury service manual
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,827
Find----mastertechmarine---or-----maxrules-----To possibly find a wiring diagram.
 

merc850

Commander
Joined
Jul 7, 2010
Messages
2,046
Here's the diagram be advized that the magneto is grounded to stop do not put 12v into it.
4cyl wiringsmall.jpg
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
49,574
I will download one today . Thank you for the reply .
You can't download legit mercury manuals for copyright reasons. However if you join AOMCI.org, there are old manuals posted for members.

99% of the sites that claim you can download are scam sites
 

MA916870

Cadet
Joined
Mar 21, 2023
Messages
15
You can't download legit mercury manuals for copyright reasons. However if you join AOMCI.org, there are old manuals posted for members.

99% of the sites that claim you can download are scam sites
Thank you for the heads up . Close call . Thanks for the help !!
 

MA916870

Cadet
Joined
Mar 21, 2023
Messages
15
Also , I've looked everywhere for the rectifier ?? Can't seem to locate it . I'm assuming it would be obvious . I will post pictures when I get home . Thanks again for everyone's time with this .
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,827
It may have left the factory with a " plate / disc rectifier " often green in color.----Perhaps replaced with a newer style.--Any wires coming down from under the flywheel ?-----Pictures will help.
 

MA916870

Cadet
Joined
Mar 21, 2023
Messages
15
It may have left the factory with a " plate / disc rectifier " often green in color.----Perhaps replaced with a newer style.--Any wires coming down from under the flywheel ?-----Pictures will help.
Only wires it has is to the magneto/ distributor . I can see the flywheel from under and can't see any other wires that may be coming from the top . This year has a top cowling that is a chore to remove . The pull cord is encompassed into the top lid . Both the manual choke at the front top of the engine and the electric choke solenoid have to be removed to take the very top lid off . However . I don't see any wires at all coming down . I'm learning a ton from the posts on this forum . Appreciate your folks knowledge ! Thank you for any advice , feed back or guidance.
 

Attachments

  • 2AD34B03-02C1-4D4F-AC18-D105F9F093CE.jpeg
    2AD34B03-02C1-4D4F-AC18-D105F9F093CE.jpeg
    3 MB · Views: 1
  • 439DF9E8-D405-4442-B524-8C2887FF7D35.jpeg
    439DF9E8-D405-4442-B524-8C2887FF7D35.jpeg
    3.3 MB · Views: 1
  • 67206538-6A15-4AC2-91FF-D9FA042ED478.jpeg
    67206538-6A15-4AC2-91FF-D9FA042ED478.jpeg
    3.6 MB · Views: 1
  • 9CF0C67F-8E10-4A37-9619-3DED5185CF64.jpeg
    9CF0C67F-8E10-4A37-9619-3DED5185CF64.jpeg
    2.9 MB · Views: 1

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,827
I am quite familiar with this style of motor.---Have a few including some white Mercury motors.-----If there are no windings under the flywheel then it likely left the factory without a charging system.----Battery is only needed to run a starter motor.----The magneto does not require 12 volts to make spark !!
 

MA916870

Cadet
Joined
Mar 21, 2023
Messages
15
I see the sun through the clouds ! Searching for something that's isn't there has forced me to learn a lot . Keeping a good quality freshly charged starting battery will be a priority for sure. I am planning on adding a second battery to run the accessories . Thank you for the information !
 

racerone

Supreme Mariner
Joined
Dec 28, 2013
Messages
37,827
I have a 1963 model 65 HP and a few others.----So no mystery on these wonderful motors here.----You must install a new water pump impeller BEFORE launching the boat !----There is no warning / shut down system on this motor.----It could overheat and score pistons.----Then it will be sticker shock looking for a new motor.
 

MA916870

Cadet
Joined
Mar 21, 2023
Messages
15
I have a 1963 model 65 HP and a few others.----So no mystery on these wonderful motors here.----You must install a new water pump impeller BEFORE launching the boat !----There is no warning / shut down system on this motor.----It could overheat and score pistons.----Then it will be sticker shock looking for a new motor.
I am planning on doing that for sure . Apparently it was done recently however and unfortunately the previous owner , who I was told treated this like his baby , passed on and I don't have dates or engine hrs . The plug to remove the bolt under the trim tab looks pretty new . Just the same , I want piece of mind .
 
Top