projects other than boats

[1985 Century Mustang]

F hole on that is just for decoration, right? I love the sound of a telecaster - play a fat strat type most of the time, myself.

Yes F hole gives it a nice crispy sound

 

[Scott Danforth]

So did inventory at work this morning.

This afternoon started working on the RV

Hacks at Lippert burned through the frame in a few places, then buggered more weld over it

Looks like Forest River did the same. 5 holes in a cluster, and a booger of weld in the middle.

Stuck bits of weld wire still stuck to the frame.

The coreplast belly pan was sagging. The wiring is just hanging everywhere under it, laying on the belt pan

Going to weld some studs and use P-clips and zip ties to clean up the wiring

Did have to make a relief cut in the frame to get the pucker out

Have the fish plates ready to weld. Cutting the 2x2 tubing to sister under the frame tomorrow

 

[Scott Danforth]

Found a bunch of what look like plasma cutter holes

Either way, the frame is straight and strengthened.

 

[Scott Danforth]

Strengthened the A-frame

Came to agreement with Forest River.... Getting a new friction hinge and stabilizer jack

 

[Scott Danforth]

Back down the shifter rabbit hole.

found the aisin transmission factory parts I need to move the shifter forward almost 8"

any salvage yard hunters, if you see a MK 2 Toyota Supra (1981-1986) with a junk 5MGE trans and a good shifter, looking for the MA61 shifter assembly. that is the 18" shifter

Just do not want to pay the price listed on fleabay



Alternatively, I can use the 19" assembly (I think from the cressida), however also do not want to pay the price below

 

[Scott Danforth]

going back and forth with a few guys on controls at work with an enginerd with a sister company..... I suggested he change his strategy because it will lead to warranty in the field....

he defiantly asked "what do you know about controls on boats" I said.... I did the door controls on this.

and i did the platform control system (electronic and hydraulic) on this. https://patents.google.com/patent/US9415979B2/en?inventor=scott+danforth&oq=scott+danforth

H I Sutton - Covert Shores

www.hisutton.com

 

[alldodge]

Very nice

 

[Scott Danforth]

that is work I was doing about 4-8 years ago.

 

[Scott Danforth]

so...... trying to figure out how to get home as all the major roads around my subdivision are closed due to flooding

would post pics..... however......

 

[Scott Danforth]

maybe this will work

 

[southkogs]

@Scott Danforth I musta' been really under a rock this past week - didn't even realize you guys just got run over by a storm. Was it hurricane status when it came ashore?

 

[Scott Danforth]

Just a little water. Mill Creek now 3' above the road

Not sure I'm still on the road. Fording 2 feet of water .

 

[jbcurt00]

@Scott Danforth using 3rd party pix?

 

[Scott Danforth]

@Scott Danforth using 3rd party pix?

Using my hotrodders thread, then linking back

https://www.hotrodders.com/threads/1952-fiat-topolino-belvedere-project.550685/?post_id=4853322&nested_view=1&sortby=oldest#post-4853322

Have 4 other forums I could use as well.....LOL

 

[Scott Danforth]

So, the other day while consuming a cocktail or three...... my thoughts wandered......

since getting everything to fit in front of the firewall is challenging...... why not pair the LS4 with an Audi/Porsche 6-speed and turn it into a mid-engined vehicle

these were the inspirations:

v=kHvHTKgEI2s

So....... went down a rabbit hole...... laid out this..... and realize the motor would have the damper up my back side . so that wont work.

 

[flashback]

Right up your alley!

 

[alldodge]

I like it

 

[Scott Danforth]

I like it

the damper location?
the Abarth with the V-tec
or the hill climb car with the V8 hayabusa

 

[alldodge]

Might give a boat mechanic envy

 

[Scott Danforth]

Here is a link to Hayabusa V8 eye candy. https://www.jfcracing.com/photogallery/#v8

way out of my budget.