Please help me. Need some advice.

thumpar

Admiral
Joined
Jun 21, 2007
Messages
6,138
Re: Please help me. Need some advice.

If you have a Napa close by go there.
 

tazrig

Lieutenant Commander
Joined
Dec 20, 2012
Messages
1,752
Re: Please help me. Need some advice.

They should. Have them look up the part number for you. If they don't have one you can always order one here on iBoats at ibaots.com or just call: 1-800-869-1686

They really know their stuff
 

thumpar

Admiral
Joined
Jun 21, 2007
Messages
6,138
Re: Please help me. Need some advice.

For an alpha one water pump kit???

Yes. I used to get my Alpha pumps from there and now get my bravo pumps from there. They carry a ton of Merc parts in stock. Their part numbers are the same as sierra.
 

tazrig

Lieutenant Commander
Joined
Dec 20, 2012
Messages
1,752
Re: Please help me. Need some advice.

Good to know, I never would have guessed.
 

Manny503

Seaman Apprentice
Joined
Jan 31, 2014
Messages
48
Re: Please help me. Need some advice.

Ok how do i post pictures hers!???? /:

I recently bought a 1990 Monterey 19footer. And its been hard finding info on this boat. Im new at boating. So my boat comes with the 4.3 L Chevy V6 motor and a 260 mercruiser sterndrive. I recently changed the motor oil and someone recomended me to use 20W 50. So i did. But i wanna make sure thAtll be fine before i take the boat out for the first time. I dont want to use the wrong oil and burn the motor. :( and so i also changed the oil for the sterndrive 260 mercruiser. I went to west marine and they recommend me to use a high viscosity oil so i got 80w 90 for it. Please help me. And tell me if im ok to go . I dont mind changing it again if im using the wrong oil. Thank you very much in advance for all your help. I appreciate it. Im a rookie at this.

Ok guys thank you very much.!
 

Manny503

Seaman Apprentice
Joined
Jan 31, 2014
Messages
48
Re: Please help me. Need some advice.

So i called NAPA and they dont carry water parts here in California :( anyways i found a store like 15 miles from my house not bad.!! And second: so i took the upper unit off as well and you guys should see how filthy that was i even found some metal parts in there. Anyways im going to clean that amd add new grease. Hopefully im able to put it back together because it looks quite complicated :( do you have instructions on how to put it back???? There are some loose parts that i think are the shifting gears or something , anyways plz send me the instructions if you have any..! other wise ill have too you tube it . Thank you.
 

Manny503

Seaman Apprentice
Joined
Jan 31, 2014
Messages
48
Re: Please help me. Need some advice.

photo(1).jpg

is that suppose to be loose like that??
 
Last edited:

tazrig

Lieutenant Commander
Joined
Dec 20, 2012
Messages
1,752
Re: Please help me. Need some advice.

plz send me the instructions if you have any..! other wise ill have too you tube it . Thank you.


Manny,

Here is the Mercruiser Service manu@l for your Alpha one drive. It goes over everything you'll need.

Boatinfo - Mercruiser Service Manual nr. 6 - 1983-1990 - R, MR, Alpha One & Alpha One SS Sterndrives

Assuming you still have the 1990 4.3L Mercruiser, here is the Service Manu@l for that also.

Boatinfo - Mercruiser Service Manual nr. 7 - 1983-1993 - GM V6 Engines
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
Re: Please help me. Need some advice.

So i called NAPA and they dont carry water parts here in California :( anyways i found a store like 15 miles from my house not bad.!! And second: so i took the upper unit off as well and you guys should see how filthy that was i even found some metal parts in there. Anyways im going to clean that and add new grease. Hopefully im able to put it back together because it looks quite complicated :( do you have instructions on how to put it back???? There are some loose parts that i think are the shifting gears or something , anyways plz send me the instructions if you have any..! other wise ill have too you tube it . Thank you.

That worries me.... Photos please.

As for instruction on putting it back together... have a look in the stickies, I've got a bunch of videos on putting the drive halves back together and also putting the drive back on the bell-housing...

Chris.....
 

Manny503

Seaman Apprentice
Joined
Jan 31, 2014
Messages
48
Re: Please help me. Need some advice.

thank you sooooooooo muchhhhhh i really appreciate all your help.... thank you....!!!!
 

Manny503

Seaman Apprentice
Joined
Jan 31, 2014
Messages
48
Re: Please help me. Need some advice.

Manny,

Here is the Mercruiser Service manu@l for your Alpha one drive. It goes over everything you'll need.

Boatinfo - Mercruiser Service Manual nr. 6 - 1983-1990 - R, MR, Alpha One & Alpha One SS Sterndrives

Assuming you still have the 1990 4.3L Mercruiser, here is the Service Manu@l for that also.

Boatinfo - Mercruiser Service Manual nr. 7 - 1983-1993 - GM V6 Engines

Thank you thank you... So much... This is gonna help me alot...!!!!! I really appreciate what you do for me man.. Thank you very much!!!!.....
 

Manny503

Seaman Apprentice
Joined
Jan 31, 2014
Messages
48
Re: Please help me. Need some advice.

For some reason is not letting me post pictures but ill keep trying.!
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
Re: Please help me. Need some advice.

Post your photos to a photo site (I use photobucket) and then post the links to those photos in between the image tags...

(Remove the spaces I've put in)

[ i m g ]www.whatever.com\your_picture.jpg[ / i m g ]

That will have those pictures appear here, just make sure they are no bigger than 600x800.

HTH,

Chris.....
 

Manny503

Seaman Apprentice
Joined
Jan 31, 2014
Messages
48
Re: Please help me. Need some advice.

Post your photos to a photo site (I use photobucket) and then post the links to those photos in between the image tags...

(Remove the spaces I've put in)

[ i m g ]www.whatever.com\your_picture.jpg[ / i m g ]

That will have those pictures appear here, just make sure they are no bigger than 600x800.

HTH,

Chris.....

Ok i will do that.
 

Manny503

Seaman Apprentice
Joined
Jan 31, 2014
Messages
48
Re: Please help me. Need some advice.

Post your photos to a photo site (I use photobucket) and then post the links to those photos in between the image tags...

(Remove the spaces I've put in)

[ i m g ]www.whatever.com\your_picture.jpg[ / i m g ]

That will have those pictures appear here, just make sure they are no bigger than 600x800.

HTH,

Chris.....


Hey question..: so i got the impeller for the water pump, so two questions., how to i determine which side the impeller turns??? And when putting the new impeller, is it suppose to enter really tight??? Or do i have the wrong impeller?? Is there a certain way to do it???
Thanks.
 

bspeth

Senior Chief Petty Officer
Joined
Aug 30, 2013
Messages
756
Re: Please help me. Need some advice.

Watch the vids,Manny. Cant go wrong if you look and listen.
 

achris

More fish than mountain goat
Joined
May 19, 2004
Messages
27,468
Re: Please help me. Need some advice.

Gasket goes on dry.
 
Top