Lowlysubaruguy
Chief Petty Officer
- Joined
- Dec 3, 2012
- Messages
- 514
I’m replacing pretty much most of my brother in laws drift boat trailer. Anyone have a better idea than I have to get paint down the tubes after its built. This trailer rotted out from the inside.
After its assembled i will drill some holes so water drains make them large enough for this middle of each length of tube.
I was thinking I’d thin out some rustoleum put it in one of those garden wand sprayers and try and fog the tubes as well as possible and maybe roll the trailer round and round a couple times its small and light. Longest tube will be about 6 feet.
But thats just my idea For the moment. Any ideas that might be more effective.
After its assembled i will drill some holes so water drains make them large enough for this middle of each length of tube.
I was thinking I’d thin out some rustoleum put it in one of those garden wand sprayers and try and fog the tubes as well as possible and maybe roll the trailer round and round a couple times its small and light. Longest tube will be about 6 feet.
But thats just my idea For the moment. Any ideas that might be more effective.