Maybe my turn for new boat time

alldodge

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,054
Scott06 said:
If you get in a bind i can speak very highly of the yam on my brothers boat. Very impressive engine and has been completely trouble free, and this coming from a die hard Mercruiser sterndrive guy…
Click to expand...
Thanks and I've heard good things about Yam, but two issues keeps me away. I work on my own stuff so I want to be able to ask a question and find folks that can discuss issues, and parts can be found

Even hear on Iboats there are not many that discuss in the Yam section and no one around here (even dealer) works on Yams
 
Scott06

Scott06

Admiral
Joined
Apr 20, 2014
Messages
6,428
alldodge said:
Thanks and I've heard good things about Yam, but two issues keeps me away. I work on my own stuff so I want to be able to ask a question and find folks that can discuss issues, and parts can be found

Even hear on Iboats there are not many that discuss in the Yam section and no one around here (even dealer) works on Yams
Click to expand...
Same here. Not a sales pitch just my observations …I can say the factory manual for my brothers engine is great and comparable with mercs. Never needed any major parts but seem relatively available.
i bought Candoo software and cables ($400) for my seadoo, so i could reset, the TPS… same software with correct cables can do any of the other marine/ atv/ snow ECUs …

be interested to see how you make out. I love the stern drive for the swim platform and sun pad but the newer merc stuff isnt GM based any more…
 
alldodge

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,054
I thought about I/O but I'm really getting tired of winterization. Do like my 27PC's motor and hearing all that power until it gets pulled for the winter, then its , oh no here we go again
polar_face.jpg
 
Scott06

Scott06

Admiral
Joined
Apr 20, 2014
Messages
6,428
alldodge said:
I thought about I/O but I'm really getting tired of winterization. Do like my 27PC's motor and hearing all that power until it gets pulled for the winter, then its , oh no here we go again
View attachment 374851
Click to expand...
i think the winterization ‘savings’ of OBs vs sterndrive is over blown. Still have to do gear lube, still have to do oil. Yes self draining and the oil is a hell of a lot easier… my boat the 5 drain plugs are relatively easy to get at But still wouldnt trade the stern of the boat where we hang out for a couple hours a year…

in the fall i do my 21 ft searay 5.0/alpha, my brothers twinvee CC/ yamaha , and my fathers seadoo… yes i spend less time on the yammie but it is not enough time to make me not love the wide open swim platform and sunpad on my Sea Ray. Comes down to how you use your boat.

these are smaller boats with better access than you are looking at but if you look under the cowl of a modern 4 stroke you have ten lbs of X in a five lbs box… so i think it is really toss a up. Is there a timing belt change like on the yammie My brother has?
 
alldodge

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,054
Scott06 said:
i think the winterization ‘savings’ of OBs vs sterndrive is over blown. Still have to do gear lube, still have to do oil. Yes self draining and the oil is a hell of a lot easier… my boat the 5 drain plugs are relatively easy to get at But still wouldnt trade the stern of the boat where we hang out for a couple hours a year…

in the fall i do my 21 ft searay 5.0/alpha, my brothers twinvee CC/ yamaha , and my fathers seadoo… yes i spend less time on the yammie but it is not enough time to make me not love the wide open swim platform and sunpad on my Sea Ray. Comes down to how you use your boat.

these are smaller boats with better access than you are looking at but if you look under the cowl of a modern 4 stroke you have ten lbs of X in a five lbs box… so i think it is really toss a up. Is there a timing belt change like on the yammie My brother has?
Click to expand...
I just bought last season a Yardarm jack ($1K) so I could get the drive on/off without damaging to me or the drive. The year before man handling the B3 (without props) back on I chipped off a piece of the skage.

Need to replace the impeller for next season, so I need to hang upside down to get the pump off so I can replace.

This 65+ guys just doesn't want to do it anymore
 
MRS

MRS

Commander
Joined
Jul 10, 2005
Messages
2,560
alldodge said:
I just bought last season a Yardarm jack ($1K) so I could get the drive on/off without damaging to me or the drive. The year before man handling the B3 (without props) back on I chipped off a piece of the skage.

Need to replace the impeller for next season, so I need to hang upside down to get the pump off so I can replace.

This 65+ guys just doesn't want to do it anymore
Click to expand...
Yup 66 yr.s here done crawling around a motor to winterize not done just cannot do certain things any more with out hurting for three days. Different boat than what you looking to get I got pontoon with outboard on it and will never go back to a I/O motor again. Good luck in getting what you want...
 
A

airshot

Vice Admiral
Joined
Jul 22, 2008
Messages
5,080
With all the fancy electronics in todays motors, the days of fixing it yourself are over....you will need to buy a diagnostic machine for the simplest of fixes. Then there is the cost....wow, they are not cheap !! Most all of todays motors are well made and fairly trouble free, I woukdn't be concerned as long as you have a reputable dealer nearby. Best price and best warranty would be most important to me. I prefer my 80's and 90's motors, much easier to work on and a heck of a lot cheaper to buy!!
 
A

airshot

Vice Admiral
Joined
Jul 22, 2008
Messages
5,080
alldodge said:
I just bought last season a Yardarm jack ($1K) so I could get the drive on/off without damaging to me or the drive. The year before man handling the B3 (without props) back on I chipped off a piece of the skage.

Need to replace the impeller for next season, so I need to hang upside down to get the pump off so I can replace.

This 65+ guys just doesn't want to do it anymore
Click to expand...
Neither does this 72 yr old guy, besides I needed to downsize my boat anyway as I mostly go by myself due to wifes health issues. Dropped down to a 16' with a 40hp outboard....so....much easier to maintain !!!! However ..there are days I wish I had my big boat back!!
 
Scott06

Scott06

Admiral
Joined
Apr 20, 2014
Messages
6,428
airshot said:
With all the fancy electronics in todays motors, the days of fixing it yourself are over....you will need to buy a diagnostic machine for the simplest of fixes. Then there is the cost....wow, they are not cheap !! Most all of todays motors are well made and fairly trouble free, I woukdn't be concerned as long as you have a reputable dealer nearby. Best price and best warranty would be most important to me. I prefer my 80's and 90's motors, much easier to work on and a heck of a lot cheaper to buy!!
Click to expand...
This is the software i bought fairly reasonable https://candoopro.com/

Its about $450 for a non professional license (limited to 4 HINs) and loads on your pc. Seems to do most of the major I/O and O/Bs can do multiple brands with add'l licenses.
 
bruceb58

bruceb58

Supreme Mariner
Joined
Mar 5, 2006
Messages
30,537
tpenfield

tpenfield

Moderator
Staff member
Joined
Jul 18, 2011
Messages
18,040
@alldodge - sorry to hear about the potential delay in your new boat. I guess there are still material supply issues, particularly motors. Stay the course for what you want, (unless the delays are excessive) you'll be happier in the long run.

Boat motors of all types are always love-hate relationships :ROFLMAO:
 
tpenfield

tpenfield

Moderator
Staff member
Joined
Jul 18, 2011
Messages
18,040
Congratulations !!! :cool:

Now you will be able to focus on the new Chappy . . . hopefully arriving soon.
 
flashback

flashback

Captain
Joined
Jun 28, 2002
Messages
3,963
Someone got themselves a nice boat! And you get to turn the page..If it's any comfort I have a Yamaha roadstar with 90,000k on it 20 years old and trouble free. They make great product..
 
alldodge

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,054
Scott Danforth said:
Where in Florida? May see it down here
Click to expand...
Naples

QBhoy said:
Jeez AD…she’s stunning. Be a bitter sweet I’ll bet.
Click to expand...
Got maybe bit over 100K in her amd didn't much over a 1/4 of that, but that's boats. Really don't want to know what happens to her after a couple years (open cooling and salt water) but will miss her

JASinIL2006 said:
That does not seem like much truck for all that boat!
Click to expand...
tpenfield said:
Looks like an F-250 Diesel towing it . . . should make it. (y)
Click to expand...
Yes and F250 diesel and it "should" make it. Its jacked up some so trailer isn't level which can cause some issue, but hope not. I greased up the bearings prior to departure

flashback said:
Someone got themselves a nice boat! .
Click to expand...
Yep, hope they take care of her
 
You must log in or register to reply here.
Top