Hydraulic ram stuck on pin

B

beruken

Petty Officer 2nd Class
Joined
Oct 26, 2013
Messages
124
Trying to remove the hydraulic rams and pin form my transom assembly and they won't free. WD-40'd and light hammering/prying, nothing. Seem to be fused with the plastic bushings and really don't want to snap the transom/gimbal assembly by hammering too hard. Can they be heated to melt the plastic sleeves?
 
Bt Doctur

Bt Doctur

Supreme Mariner
Joined
Aug 29, 2004
Messages
19,292
LOSE the HAMMER Get your self a pitman arm puller and slightly modify the ends to fit behind the cylinder. once removed use a 3/4 inch plumbers wire brush to clean the insides of your clyinger untill the bushings slide right in
 
Last edited:
B

beruken

Petty Officer 2nd Class
Joined
Oct 26, 2013
Messages
124
Bt Doctur said:
LOSE the HAMMER Get your self a pitman arm puller and slightly modify the ends to fit behind the cylinder. once removed use a 3/4 inch plumbers wire brush to clean the insides of your clyinger untill the bushings slide right in
Click to expand...
too late. metal hammer on metal worked. suspect it has been 25 years
 
You must log in or register to reply here.
Top