Well the first two coats went down really easy, other than having to be very careful and painting myself in a corner. Since the bilge and gas tank hatch had basically no wax as I think the wax had separated I decided to go ahead and get in there and sand them both after the second coat on the deck had dried. I knelt on some plastic and prepped the bilge. After that I wiped everything in that area with acetone. Did the same to the gas tank hatch.
This time I wasn't taking any chances, I set the wax over a heater vent to make sure it was all mixed well again. I got the garage up and over 60°. Double checked my ratios and made sure to mix everything very well. Everything now has a third coat ( 4 on the high tread areas). I'm probably going to also put plastic down just to cover my butt too.
Overall very happy with the results, there's a few areas that could have been sanded or feathered out more but you really have to be looking. One of those things I will always see but on one else ever will.