So next steps moving forward are:
1. Build Seat Bases
2. Glass Seat Bases
3. Rear Seat Arm Rests
4. Passenger Seat Side Panel (the old seat was an L, we are replacing with a bench for simplicity)
5. Gas Tank Cover (may just clean it up and re-seal
6. Paint floor and walls with white marine paint
7. Foam Flooring
8. Install new engine components
9. install Port side Welsh Plugs (realized I forgot to do the port side after bashing my hand putting in Starboard)
10. Debug and run engine
11. Finish buffing and polishing
12. Exhaust blower
13. Front exhaust cover
With even more to do, but these are the first that come to mind. Probably wont nock off in any particular order, short of the seat bases needing to be built and glassed before the floor paint and foam goes in.
And just because Im still happy about it, another pic of the shiny finish.