Search results

  1. O

    No spark

    1996 50hp Evinrude last time out seemed like a fuel problem was hard to start but fired up run for bout 5mins or so then started to cut out and bog down and pick back up mess with throttle or play with it and it would go ahead and go but then started dying but would start right back up we made...
  2. O

    outdrive gears spun causes ??

    83 alpha 1 120hp was out and heard like a miss in motor and it bogged for a split sec. and sounded like went to neutral. got towed in and got it home took the top of outdrive off and gears eat off, no water in oil and the oil looked good except the metal in it, was nice n shiny in the sun...
  3. O

    how do i get a new boats person and weight tag

    I have lost the tag that states the persons and weight limt how can I get a new one? or will it just be easier to get one out of an junked boat.
  4. O

    120 cracked block or ??

    1983 120 de winter rising tried firing up old gal on muffs, had to mess with the points had no fire, but while I was messing with that I seen brown kinda thick stuff in the hull under motor and was coming from where the starter is at from fly wheel cover. well got it running still a few drips...
  5. O

    do i need trim tabs or more weight ?

    1983 baretta 16 ft 120 heres my problem put new floor, foam, all the fun stuff:) . last year and took it out 10 times or so after restore. done great all but for the side to side rocking while moving, like when someone moved or got on some one elses wake, even got thrown down...
  6. O

    fuel pump rebuild for 1986 120 rebuild kit?

    do they make a rebuild kit for a fuel pump for a 1986 120 4cly chevy? if so anybody know a part number?
  7. O

    lower shift cable tube replacement

    can you just get the outer cable i guess just the cable tube with the threaded end that goes into the gear box? my inter cable is good it has pulled out of the threaded part, after just changeing the bellow:facepalm:and put all back together..knew it went back to easy. if so what would be the...
  8. O

    oil leak in lower unit out water pick up?

    alpha 1983 now is this a common thing ? just a bad seal or somthing else ? i have never seen them leak oil out of the water pick up just on the right side, i have had it off for awhile why i was redoing the floor and transom and it was not leaking before or i did not notice.just got in Jan...
  9. O

    shift bellow ? replacement

    its on a 83 120 mec. just redone transome and all, so just put all back together and took it out for a water test leak, well it leaked:facepalm: in water looked like shift bellow cause moved it and would not leak as bad, well got home and found a hole in the shift bellow.... now can i replace it...
  10. O

    ski locker+foam

    will it hurt to fill the ski locker wiyh foam, cause when i put the new deck down i dont plan on making acess to it, or does it need to be free of foam for water drainage, any ideas????
  11. O

    spray in rubber (rubber in a can) thoughts ????

    being seeing this on tv and now seen at wall-mart and our feed store, what is yall thoughts on this stuff? thinking about getting a few cans to colt over were i am going glass and reasin(after),like all the corners and joins on the stingers and transom. my thinkn it would just add alittle more...
  12. O

    think i will have to start over?

    workn on a full rebuild and just got the transom in and fiberglassed in....just cut the key hole and drilled the plug hole yesterday and called it a day....and 2day it rained all day hard at that, and i had not got around to treatn the key hole and plug hole and it got soaked...so should it be...
  13. O

    front motor mount what to use

    redoing a baretta 16 footer with a 120 mec., got to replace all wood:facepalm: what do i need to make the front motor mount out of? would a 4x4 treated post work glassed in ?
  14. O

    how do u change the thread title

    trying to figure how to do this were i can keep it on one thread, my thread started off being just askn about spider cracks now its ending up to be a full restore. i can change the first post title but not the main thread title, any help or can u even change this thanks
  15. O

    drill holes and spider cracks would this b ok to do?

    Re: drill holes and spider cracks would this b ok to do? heres a pic of the new floor the last owners put in a year ago....lol.... going to half to replace transom also....how bad is it pulln motor and drive or really puttn back in takn out dont look to bad, should not half to mess with the...
  16. O

    drill holes and spider cracks would this b ok to do?

    Re: drill holes and spider cracks would this b ok to do? thanks for the read thats what i am useing tractor paint but its not the valspar..... heres my motor cover about 6 to 8 hrs today working on it before and after.
  17. O

    drill holes and spider cracks would this b ok to do?

    Re: drill holes and spider cracks would this b ok to do? think they loaded, the 2ed to last one is were the ladder was,the rest is all up front were the rails were and where the back cushions go, i have done nothing to this boat yet this is the way i got it,
  18. O

    were can i find more info on baretta boats

    i got a 1980 and a 1983 both are differnt in so many ways, would like to find out more on both of them
  19. O

    pre-apha and apha 1

    what is the differnce besides looks and wich one is the better out of the two?
  20. O

    drill holes and spider cracks would this b ok to do?

    just got this boat and has a lot of screw holes with no screws in them and a few spider cracks in places.... would it be ok just to use bondo glass to fill them in? and the next ? is do i need to tear out the all foam to replace the stingers the foam seems to be dry. it looks like some one...
Top