Search results

  1. C

    2000 70hp johnson.

    maybe this manual can help just download https://drive.google.com/drive/folders/1-pyBmXzRaZ16y9sJ1QkSfjnBGwA-HzsB
  2. C

    1982 7.5 hp Johnson compression numbers?

    well seems comp #s are ok but lots of variables to check. how's the prop/boat match ..... linkage.....sparks..... etc... . can you measure RPM's at wot ?
  3. C

    1982 7.5 hp Johnson compression numbers?

    likely low a bit and equal which is desired ....but....it runs good, idles great...how much faster do you need to go and at what cost...to improve PSI's. 7.5s go way back to the 50s ... great fishing motor not so good for skiing :)
  4. C

    Kill Switch Problem 1986 Johnson 150 J150TXCDC

    maybe this can help if you trace the wires for breaks or lack of continuity in the x-connect fat cable https://maxrules.com/graphics/omc/wiring/1986_150_175.jpg
  5. C

    Evinrude Timing Tool

    post is kind of old... he probabaly got it going 14 years ago it is best not to revive old posts ...
  6. C

    1996 Johnson 50 Not starting

    they are basically carbon fibers mostly used on cars today to reduce static interference which was a pain when AM radio was the big thing. Today with FM 5g Cell etc... carbon fiber wires are likely cheaper that copper strand. Are they needed on cars today ..I don't know.. maybe the...
  7. C

    Leroy'S R.I.P. ???

    see post 25 and 26 to access Leroy's ... files
  8. C

    Info

    or.... 1-2 ohms primaries and 4-8 Kohms on secondary on an oldy coil
  9. C

    Johnson 25 hp hood part needed

    well if you can't find one just line up the cracks... back fill (cover the cracks) with baking soda and crazy glue. front side... same process fill gaps with baking soda wet with crazy glue...repeat and level out the cracks. touch up with paint
  10. C

    2011 15hp HO Evinrude

    A week ago, I changed the spark plugs, fuel filter, water pump, and got a portable 6-gallon tank. With fresh gas in the portable tank, after about three start-ups, the motor ran fine on muffs for approximately 1/2 hour. Also, I've added a 10 micro water/gas separator with a clear bowl. No...
  11. C

    Info

    prety vague question ... any engine model in mind ???
  12. C

    Leroy'S R.I.P. ???

    in the mean time.... copy all you need before it is gone for good !! https://web.archive.org/web/20230111230538/http://leeroysramblings.com/
  13. C

    Need your opinion about replacing the original Reed Valves in my 1986 Evinrude 30 hp.

    sorry to hear about poor health... .. just keep on boating and fishing ! see post from TEMU
  14. C

    1990 2 stroke evinrude 40 hp

    if you think a coil or coils overheat you can always cool them down real fast for a qwick test. Same for any suspected heat sensitive parts . Dollarstore keyboard spray cans held upside down will spray propellant that acts likea freeze spray. if the coils react to a fast cool down...
  15. C

    1990 Evinrude 150 XP Loss of Electrical Power Help??!!

    the fuse off the solenoid must have 12v on either side just sitting there. 32 amp fuse seems big ?? recheck specs fused power 12v MUST reach the key B post follow from solenoid post 12v to key's B post with a VOM of test lamp. check all connections incl. main ground from...
  16. C

    40hp Dead Top Cylinder

    as the world population grows there is less and less intelligence to share... and lots of folks can't even read .
  17. C

    Evinrude 50 impeller

    From TEMU
  18. C

    40hp Dead Top Cylinder

    do you or don't you feel a good suction on the carb face like on the bottom carb when the engine is turning. if you don't it will never suck fuel out of the carb....simple. no gas no explosions
  19. C

    Evinrude 50 impeller

    never give or lend tools to your BIL....
  20. C

    Sputtering out and dying

    if you put your head in that barrel long enough you will die to.... ckoking does the same ...kills it drowns to engine and stop the inflow of air to mix with the fuel... and don't hight speed it in a barrel !! it is not going anywhere.
Top