Search results

  1. puffitu

    Mystery Solved: Overheats have consequences... 1987 Force 85 H.P.

    I think I’ve got a couple of those sprigs -pm me if you’d like
  2. puffitu

    Tilt trim switch wiring

    My thoughts on this; the choke selonoid can malfunction if not strapped in correctly; maybe too tight or loose in the bracket. Maybe positioned too high or low in bracket. As Jerry suggested though; check with a light and also check with voltmeter for continuity in entire length of choke...
  3. puffitu

    Stuck in reverse

    Have you serviced the lower unit recently and maybe not aligned/checked everything prior to the wife driving it?
  4. puffitu

    Stuck in reverse

    I periodically check the stop nuts as I had a similar issue a couple years back; tighten with a wrench. The cotter pin may have fallen off but then I don’t think you’d be able to shift at all..also check control ends at the helm; any looseness would prevent correct travel of the cables as you...
  5. puffitu

    '84 evinrude 6hp E6RCRM

    Story with mine is that when I got it-shaft was stuck in the crank case, who ever tried to get lower off; broke/cut bolts, beat on the flywheel nut with a poorly calibrated bashometer so much that I had to shave a thin layer of mangled metal just to free the flywheel, the drive shaft looks like...
  6. puffitu

    '84 evinrude 6hp E6RCRM

    I really appreciate your advise on this model/year as there’s very little info on line about this particular year. I’ve got thE Seloc manual but seems vague at best. I’ve ordered new coil and sensor, carb kit. Now that you mentioned the mag plate; this one may indeed be shifting as well. What to...
  7. puffitu

    '84 evinrude 6hp E6RCRM

    Thanks, wasn’t sure; should I order the coil and sensor since I got the hat off this this anyways?
  8. puffitu

    '84 evinrude 6hp E6RCRM

    Trying to revive this motor. Its showing signs of life after performing some maintenance such as plugs, fuel lines, head gasket, thermo, carb kit, impeller, seals etc. it fired up for about 5minutes and pumped water and so on, then it stalled out. Checked fuel delivery and checked out. Decided...
  9. puffitu

    Failed drive shaft

    That would be a Jerryjerry05 question; he usually responds during morning hours. I do have a ‘90 lower complete assembly; not sure if it’s a match but may be a part option if you’re not able to get what you need otherwise. Cheers!
  10. puffitu

    1970 johnson 4hp

    Thank you; I’ll get on it in the morning and post back
  11. puffitu

    1970 johnson 4hp

    how difficult is it to set check points on these ?
  12. puffitu

    Startup sneeze-1988 125hp

    Thanks Jerry but it seems it clears up after warm up so not sure but I’ll play around with the starter next chance I get and post back
  13. puffitu

    Startup sneeze-1988 125hp

    Thank roscoe-I kinda had that feeling.
  14. puffitu

    '95 motorguide GWB52W

    Hello All I would welcome any input on my trolling motor which I recently inherited. I am able to switch to forward; working as should, neutral; working as it should but when switched into reverse; it goes into full blast forward. So no reverse at all. Not a big deal as I can ultimately turn the...
  15. puffitu

    Startup sneeze-1988 125hp

    Hey all Just wanted to hear some input on a slight cold start sneeze I’ve been trying to chase down. It’ll only do it at cold start; seems to clear up after I throw it into high idle
  16. puffitu

    Torque specs

    Thank you!
  17. puffitu

    Torque specs

    Hi all I’m trying to resurrect a 1984 evinrude 6hp and in need of torque specs if anyone’s got them.. thanks
  18. puffitu

    Throttle issue

    https://images.app.goo.gl/2mQN4qpzLmcumLyH9
  19. puffitu

    Wiring issues 85hp force

    https://www.cdielectronics.com/wp-content/uploads/2013/02/CDI%20Troubleshooting%20Guide%20-%202012.pdf
  20. puffitu

    Wiring issues 85hp force

    👍
Top