Search results

  1. sms986

    Mercruiser alpha one gen 1 buzzer system

    I thought so. Thanks!
  2. sms986

    Mercruiser alpha one gen 1 buzzer system

    I'm working on the wiring for my boat. 1989 mercruiser alpha one gen 1, 305 thunderbolt iv motor. What trips the buzzer? Just water temp and oil pressure?
  3. sms986

    Engine cooling water in tube bigger than gimbal housng tube

    Definitely not in the bilge lol. The one on the picture above looks like cork? I really need to find a part #.
  4. sms986

    Engine cooling water in tube bigger than gimbal housng tube

    Appreciate all the input. After reviewing it the bushing listed way above is the one that seals the tube in the gimbal housing.
  5. sms986

    Engine cooling water in tube bigger than gimbal housng tube

    That's it. I'll get one ordered tonight thanks!
  6. sms986

    Engine cooling water in tube bigger than gimbal housng tube

    Well the hose was removed 3 years ago lol. I did a full gut and restore on the boat. Rebuilt the entire engine and gimbal assembly. I'll look around on schematics again too see if I missed something.
  7. sms986

    Engine cooling water in tube bigger than gimbal housng tube

    That's what I needed to know. Does anyone know the part # for that bushing?
  8. sms986

    Engine cooling water in tube bigger than gimbal housng tube

    Trying to figure out why it's bigger. When I rebuilt the motor I left the power steering heat exchanger all hooked up. So I know it's the hose that came off at that location. I have no idea if it was rigged up by PO with a smaller tube i side and a hose clamp or if I am missing a part.
  9. sms986

    Engine cooling water in tube bigger than gimbal housng tube

    1989 mercruiser alpha one gen 1 5.0. hooking the engine up and the water inlet tube (from transom to power steering heat exchanger) is a lot bigger than the white tube that comes through the gimbal housing. Am I missing a part?
  10. sms986

    1987 Larson DC-215 restoration

    Been a while since I've had time to work on the boat, but I did get the engine in over the weekend. I'll spend this week getting it all hooked up.
  11. sms986

    Looking for smoother throttle

    Don't know the year of the Yamaha, but it was a 70 4 stroke. Wanna say 2015+. Another Yamaha fl115 2019 And a mercury pro xs150 2021 Only one I looked at I'm depth was the Yamaha 70 and it has cables going to the motor for throttle and shift
  12. sms986

    Looking for smoother throttle

    Do you think that 5" tight spot might be hanging it up a bit? I think it's still a pretty wide turn but I'm no expert I just play with boats. I got teleflex cables when I bought the boat, they've felt the same since I put them on last year. Next time I replace cables I'll make sure they don't...
  13. sms986

    Looking for smoother throttle

    No, I made sure everything was run pretty smooth and clean. I think the tightest bend I have is 5" radius where the cables drop down from the console then across the floor.
  14. sms986

    Looking for smoother throttle

    This is the kind of remote control I have. Don't have any pics on my phone of my boat. It has a tension adjustment but I have it all the way out.
  15. sms986

    Looking for smoother throttle

    I just finished up fixing up a year's worth of hard use on my fishing boat this month, including some nice upgrades. I have a little bit of available cash left over and I'm trying to figure out what I need to do for the super smooth throttle control. '99 Merc 90 HP with remote control side mount...
  16. sms986

    Help mounting Garmin GT54 transducer

    The other transducer is skewed, but I never really cared because I only used it for a depth and structure general idea. I don't want to do that with this one though. I just measured and I have 1" between the prop radius and where the transducer would be on the outer edge of the transom.
  17. sms986

    Help mounting Garmin GT54 transducer

    I'm going to be pushing it... I'll try to mount it where those screws are and see what happens.
  18. sms986

    Help mounting Garmin GT54 transducer

    After using the old humminbird helix 5 for over 5 years now, I finally upgraded to a Garmin 93SV with a GT54 transducer. I am having a hard time figuring a place to put it. Everything I've read tells me basically no where. I've got 2x6 bunks that I just installed, a trolling motor, the outboard...
  19. sms986

    Outboard cowl paint help

    @Scott Danforth I have no issue with buying cheap stuff and tossing it when it goes lol. That Looks really good though! Here's my cowl all done up.
  20. sms986

    Outboard cowl paint help

Top