Search results

  1. flyingscott

    Evinrude 25hp outboard wants to die when I give it gas

    ABSOLUTELY NOT
  2. flyingscott

    Evinrude 25hp outboard wants to die when I give it gas

    ABSOLUTELY NOT
  3. flyingscott

    Evinrude 25hp outboard wants to die when I give it gas

    First things First ,No cold chisels, Do the job right and you wont wreck ****. Second thing is you dont need to take anything apart on the water to get the carb to fill. Open the low speed screw an 1/8 of a turn at a time and try that first.
  4. flyingscott

    Oil Consumption

    Check your oil pump linkage
  5. flyingscott

    towing - engine in neutral?

    Get an electric winch
  6. flyingscott

    No spark on half the motor!

    thats a douchey answer
  7. flyingscott

    Compression

    Dont buy it until you know what size pistons are in it.
  8. flyingscott

    1959 wizard 7.5 HP

    McCulloch built motor
  9. flyingscott

    Timing off due to throttle arm and cam follower?

    The cam has 2 small screws holding it in from the bottom loosen those for your adjustment. The adjustable arm wont work with the recoil safety.
  10. flyingscott

    water coming from lower unit

  11. flyingscott

    water coming from lower unit

    Looks normal. Pee stream won't flow until thermostat opens. Did you make sure the washers are on the impeller? No cracks on the housing grommet
  12. flyingscott

    water coming from lower unit

    DO NOT BEND THE WATER TUBE.
  13. flyingscott

    1975 and 1979 Johnson 20 hp

    75 and 79 are different motors. The 75 is a 22 CID block the 79 is a 32 CID block. Not much in common
  14. flyingscott

    water coming from lower unit

    Did the water tube come out with the lower unit?
  15. flyingscott

    Converting a long shaft 1991 Evinrude E40TLESR to short shaft and tiller controls

    That motor would not have normally come with a 5 in spacer for a 20" shaft. Center section would have been cast as a 20".
  16. flyingscott

    Evinrude 60 HP (3 Cylinder) Won't Suck Fuel

    The ball is supposed to get hard that is normal. Do a compression and spark test. and the model #
  17. flyingscott

    Mercury EL 25hp Outboard Shut Off

    Buy a used one off of ebay. They usually plug right in by the CDI
  18. flyingscott

    4hp johnson slower than expected

    compression might be ok. Sounds like you are running on 1 cylinder. Check you points and coils
  19. flyingscott

    Mercury EL 25hp Outboard Shut Off

    Should be a kill switch on the front of the motor. Red toggle
  20. flyingscott

    Choke stays closed

    NO just you
Top