Search results

  1. M

    Yamaha 200 static flush with boat in water

    I have a yamaha f150 with the same flush system. I don't know of any other system, don't drop the yellow washer.
  2. M

    Unknow device on back of Glastron Sportster XL

    Yup, it's the speedo tube.
  3. M

    2004 115 honda not starting

    What's the status of the battery? Can you measure the voltage at the starter while cranking? Regarding the smell, what did it smell like? Gas, oil, plastic,wire or steam? How old is the impeller? Was there water coming out the pisser? Can you run the motor at home?
  4. M

    Tahoe 2150 Bulge Pump Issue

    Can't you hear it running? Can you follow the discharge hose back to the pump? If it's running with the power off start tracing the wiring issue. Start at the switch with a digital voltmeter to find out why the switch isn't working then go from there.
  5. M

    Nissan Outboard 50 HP NS50D2 won’t turn over

    Where did you put the penetrating oil? Maybe it's me but if I went thru the work to look at my impeller I'd swap that sucker out especially if I didn't know how old it is. Are you guessing the oil isn't being pumped from the tank and there was no oil mixed in the gas and the motor seized? Can...
  6. M

    Engine stalls when put in gear

    How's the fuel? Is it two years old? Was it stabilized?
  7. M

    What amp fuse for power to gauges?

    As Scott said a 4 or 5 amp should work, but I'd want to know what gauge wire you're using. You want the fuse to blow before the wire melts. If you have a digital voltmeter they usally have a 10 amp dc current scale. You can put it in series with the gauges and see exactly how much current they draw.
  8. M

    AC power when switch is off?

    Is the electrical panel, meter and master panel switch on your boat?
  9. M

    VIDEO: Runs Perfect For A Minute Then Red Light Comes On, Motor Shutters & Stops.

    what's the fuel level in the filter while running and as it peters out? Crack the fuel tank cap open and try it.
  10. M

    AC power when switch is off?

    Just a guess but maybe the meter is showing there's 120v shore power and is wired before the master panel switch. Is the master panel switch on your boat?
  11. M

    VIDEO: Runs Perfect For A Minute Then Red Light Comes On, Motor Shutters & Stops.

    Have you checked the fuel filters? Try squeezing the primer bulb when it starts to die.
  12. M

    Outboard Flex Tube

    check out flexible split loom and polyethylene spiral wrap.
  13. M

    Gamefisher 5hp water pump question

    Is there water coming out of the pisser? Is the motor over heating? Regardless if you don't know how old it is replace it.
  14. M

    Diagnosing non working depth sounder

    I'd say the gauge is bad. The xducer may be bad too but it looks like the gauge is not seeing the xducer.
  15. M

    Descaling Outboard's Cooling Systems.-

    Thanks for the link, interesting information.
  16. M

    1968 Mercury 100hp Water from upper exhaust openings

    yup, it's normal.
  17. M

    Diagnosing non working depth sounder

    make sure the xducer is pluged into the guage then unplug it from the gauge and see what it reads.
  18. M

    Mounting bolts

    My uneducated guess would be that you'd be safe doing it, even for several years.
  19. M

    Mounting bolts

    I'm just throwing this thought out there to think about. Won't the zinc coating eventually dissolve, chip or deteriorate and start corroding the exposed metal of the bolts especially if in saltwater?
  20. M

    Transducer plug won’t stay in back of unit

    I should have been more specific, I meant pictures of the end of the plug, the male part. the part that fits into the socket. I wanted to see if there's a tab or threaded end that's suppose to keep the plug in the socket.
Top