Diagnosing non working depth sounder

littleape

Petty Officer 2nd Class
Joined
Oct 2, 2017
Messages
157
I have a Lowrance 3500 depth sounder on my 2000 rinker bowrider. It just flashes 0.5ft all the time, it never worked since I got this boat, be it on trailer or in the water.

The transducer is mounted under the engine, not looking forward to touching it, hard to see how wiring could be damaged since its protected by a rubber sleeve from the back of the gauge all the way to the transducer.

Any ideas on what could be going on?

20210622_203422.jpg
 

mike_i

Ensign
Joined
Jun 28, 2017
Messages
942
make sure the xducer is pluged into the guage then unplug it from the gauge and see what it reads.
 

mike_i

Ensign
Joined
Jun 28, 2017
Messages
942
I'd say the gauge is bad. The xducer may be bad too but it looks like the gauge is not seeing the xducer.
 

littleape

Petty Officer 2nd Class
Joined
Oct 2, 2017
Messages
157
Looks like these things used a very specific frequency so unless I can find a good used gauge or transducer (of broken) its a no go and entire setup has to be replaced.
 

dingbat

Supreme Mariner
Joined
Nov 20, 2001
Messages
16,081
A “flashing” sounder is typically a dead, not responding transducer.

Transducer are wear items. They need replaced now and them.

Info on replacement

 

Nextelbuddy

Petty Officer 2nd Class
Joined
May 4, 2020
Messages
156
A “flashing” sounder is typically a dead, not responding transducer.

Transducer are wear items. They need replaced now and them.

Info on replacement

just did this on my boat replaced the 3600 system as well. great write up
 
Top