Search results

  1. T

    Johnson shift cable bracket?

    The trunion wheel gets captured in the bracket with a pin
  2. T

    J15RSSM no idle

    👍
  3. T

    J15RSSM no idle

    Can roller in correct position and all in one pice? Might help to do a link and sync or at least walk through the process and confirm its all good.
  4. T

    J15RSSM no idle

    Ah right you said it was pull start. So you have a pull primer then correct? If so is it closing all the way and not bleeding extra fuel?
  5. T

    J15RSSM no idle

    I’m talking about the primer valve on the motor Does it have a red lever? I could be way off base but it just a thought.
  6. T

    J15RSSM no idle

    Manual primer valve in the correct position and no leaking o rings? Just wonder if it’s getting more fuel than needed at idle. Being you have tried 2 different carbs it doesn’t seem to be an idle circuit issue unless they were both dirty.
  7. T

    J15RSSM no idle

    Primer leaking?
  8. T

    1992 E'rude 8 hp. link and synch .... deciphering the manual

    If only someone would send you some Maine lobster to go with your steam bath it would complete your day.
  9. T

    150 black max turbo starting

    Possibly an exhaust leak and your sucking in spent air. Other will chime in I’m sure.
  10. T

    Converting a long shaft 1991 Evinrude E40TLESR to short shaft and tiller controls

    those 35’s from the 80’s are great motors and will last for ever if looked after.
  11. T

    1985 Evinrude 15 HP trouble starting

    Don’t used starter fluid on a 2 stroke. Try squirting fuel oil mix into the carb while pulling it over. And see if it will fire. Report back.
  12. T

    cooking

    Oh man Biscuits and Gravey! I know what I making for lunch tomorrow. And I’m still thinking about that pineapple upside down cake. It’s in my near future I can feel it.
  13. T

    Evinrude/Johnson gasket sealer alternative?

    Permatex aviation
  14. T

    Anyone give me some info on this Engine please!

    Sorry that’s a new one on me. Googleing the name did bring up some stuff. Maybe try that. Good luck
  15. T

    Where would you rather fish the 3rd week in October

    I hear ya. Hands down my favorite fish.
  16. T

    Random

    I have never been a fan of John Von Blowme But I have to give him credit for helping this person out and not just standing by to watch and make a vid of event which seam to be the thing now days. To many people aren’t will to help out anymore they just want to make some video content for social...
  17. T

    Identify Motor

    It’s no guarantee but sometimes the disk that looks like a core plug can help you out with a model or ser number.
  18. T

    Random

    I know a guy that would absolutely flip out over this. He has a major hang up with things that aren’t in a straight line. We had a two hour conversation about how to make his fence top flat and level on a property that was very hilly and far from flat and level. I was forced to keep it level and...
  19. T

    Johnson 6hp not pissing

    Nope. The pump is just above the where lower unit bolts to the mid section. It’s not self priming and needs to be completely submerged. You can certainly try it again as it’s your motor but the impeller should be replaced before any outing if you don’t know 100% when it was last done.
  20. T

    Climate change and fishing

    I’m back again with a new one. There was a Pelican sighting today here on Marthas Vineyard. I can’t think of anything other than a climate change bringing these more southern spices up this way.
Top