Search results

  1. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    Hi all, I have an 88 capri 1750 BR and wanted to ask if anyone would know replacement cable part numbers for the throttle and front shift. I've been looking around and in worst-case scenario I measure and identify the connections but wanted to ask anyway. The ones I currently have are red which...
  2. 88 Capri (2022 SOTY)

    Can worn points cause this? Video included

    Glad you got her running better. I have to rebuild my carb in spring and hope to have the same luck you do 😊
  3. 88 Capri (2022 SOTY)

    Engine idle RPM

    Thanks Scott.
  4. 88 Capri (2022 SOTY)

    Engine idle RPM

    Hi all just a quick question I hope. In reading some of the articles about setting the idle speed I have seen a couple people mentioning about the speed going lower once in the water compared to being on muffs. Is there a rough estimate on the change of rpm's?
  5. 88 Capri (2022 SOTY)

    1996 Century Boats 1800 Center Console Refit and Modernization

    That looks phenomenal! That's some great work to be proud of!
  6. 88 Capri (2022 SOTY)

    Stickies on Winterizing 3.0 cobra

    Thanks Hugh.
  7. 88 Capri (2022 SOTY)

    Can worn points cause this? Video included

    To be honest I totally forgot that there used to be one and the kits I have since ordered didn't include it. It doesn't appear to be an individual part. I did find one pictorially under OMC/Johnson #0382135 which I may get in hopes it truly has it which thankfully it's inexpensive. Thus is for...
  8. 88 Capri (2022 SOTY)

    Can worn points cause this? Video included

    Do you happen to have the part number with the included lube wick?
  9. 88 Capri (2022 SOTY)

    Question On Changing Stringer Location

    The boat I am currently working on is my first. I suggest doing alot of research prior to starting and see if it's in your range. My 88 Capri post like others can give you some idea and always come to the forum with questions.
  10. 88 Capri (2022 SOTY)

    Stickies on Winterizing 3.0 cobra

    I'm glad you mentioned the fogging oil because I've never heard anyone mention it before.
  11. 88 Capri (2022 SOTY)

    Immediate delamination

    I personally had trouble with the roller method and went to the cheap bristle brushes.
  12. 88 Capri (2022 SOTY)

    Immediate delamination

    I saturated the rag I was using almost like slopping it on and it would make the existing glass sticky. I would apply a layer of resin just as I was about to lay the cloth down and pour a small puddle of resin and use a bristle brush and work towards the outside. I also found that depending on...
  13. 88 Capri (2022 SOTY)

    Immediate delamination

    I had a similar issue when I started my project in which I started being alot more generous with the acetone and putting a coat of resin down prior to laying and wetting the cloth and it really eliminated that issue for me.
  14. 88 Capri (2022 SOTY)

    Question On Changing Stringer Location

    I originally had 3/4" pine boards for stringers and they lasted 30 years. I replaced them with 3/4" plywood and they are so much stronger than the originals plus last my lifetime because they are sealed correctly.
  15. 88 Capri (2022 SOTY)

    Question On Changing Stringer Location

    I just ground down to "clean" glass. The area the stringers were in had a slight angle to them and any adjustments I needed to make with the height of the stringers I took it from the wood. The crease as you mention I ran into under the console and altered the stringers to keep them at the...
  16. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    Hi all, I ran her for awhile today and have come to the realization that a carb cleaning/rebuild is going to happen in the spring but I'll run her one more time to get the stabil into the fuel system for the winter. I reinstalledthe front units so the windshield supports could be attached.
  17. 88 Capri (2022 SOTY)

    Question On Changing Stringer Location

    Here is a picture from my project showing what I mean.
  18. 88 Capri (2022 SOTY)

    Question On Changing Stringer Location

    I left a "lip" when I did mine. I left it high enough so I could use c-clamps to clamp the new ones in place while I PB's them in, I also did this for my motor mounts.
  19. 88 Capri (2022 SOTY)

    88 Capri Restoration (Splashed 08/2022)

    Thanks 😊 It was my first time and made many mistakes that I re-did but I am happy with the results so far but I just wish it didn't take so long lol
  20. 88 Capri (2022 SOTY)

    Winterizing

    Thanks 😊
Top