Search results

  1. LaqueRatt

    25HP Idles Low in Neutral

    Motor runs well, starts on one pull. Only problem is it idles low in neutral and turning the tiller doesn't do an awful lot. Just turns a hair is all. It revs so low even with the throttle fulling cranked that the motor wants to die. When it does it's hard to start. Once warm though all is good...
  2. LaqueRatt

    New Trailer - Weird Bunks

    Thanks for the info. I intend to put some carpet, maybe vinyl downspout material on them, but going to just cut some new boards instead of drilling more holes in these things. So they tilt the wrong way. This is what I was thinking too. What about the bevel cut on the ends? Never saw bunks cut...
  3. LaqueRatt

    New Trailer - Weird Bunks

    Picked this up off a neighbor. Curious about the bunks. Why the bevel cut at the end and how come they're not balanced? Is this on purpose or just shoddy work?
  4. LaqueRatt

    How to Remove Brass?

    You'd think so wouldn't you? Not so. The original prop had that much slop in the bore. The new prop fits very snug. Greased the shaft and tapped it home with a rubber mallet. Haven't had it out on the lake yet, but think it's going to be OK.
  5. LaqueRatt

    How to Remove Brass?

    Never mind. I got it on with a little pursuasion. It fits tight, but it fits! Should I grease the shaft? I'd hate to not be able to get it back off if I need to.
  6. LaqueRatt

    How to Remove Brass?

    Bought a new prop for my 77 25 HP rude: Michigan Match 3-Blade Aluminum Propeller (012013) Supposed to be a direct replacement for the original OMC 388088. All seemed good until I tried to install it. The old prop has a larger motor side bore which looks to extend down about an inch. I can see...
  7. LaqueRatt

    Are plastic props junk?

    Only time I've seen a plastic prop was also on a Force. Think it was a 9.9. Looked might small and flimsy. Not sure if it was stock or not, but sure didn't look right.
  8. LaqueRatt

    Evinrude Paint

    I like black. Black is black. Back when I was into snowmobiles any old black was a good match on any factory black sled. Primer question: Is it necessary to use etching primer if I don't sand through to bare aluminum? I'm thinking not, but would like to know for sure.
  9. LaqueRatt

    Evinrude Paint

    Yeah, that's prob the best advice. LOL I'll have to take a part of the motor along and drag somebody with so that I'm at least in the ballpark. I suppose touching up is a dumb idea. If going to do anything guess should shoot the whole thing. I've got a spray gun and know how to use it, but the...
  10. LaqueRatt

    Evinrude Paint

    Thanks guys. You've all been a lot of help. Sadly it's all for nothing though as I've only found one place that has the correct color. They're in Canada and with shipping one rattle can is going be nearly fifty bucks. Current plan is to find something that looks close and go with it. Be nice if...
  11. LaqueRatt

    Evinrude Paint

    I hear you, but neither really needs a complete paint job. Might decide to redo the 25, but for right now I'd just like to find some matching paint for those two motors. Since I'm a bit color impaired, these rudes all look quite a bit alike and was hoping they all were the same color. I also got...
  12. LaqueRatt

    Evinrude Paint

    Thank you. That's very helpful. I'll have my wife scope out the two rudes which would help some, but I still need to figure out the exact paint color to have it come out right. That chart though is what I needed. Much obliged.
  13. LaqueRatt

    Evinrude Paint

    This shouldn't be that hard. So none of you guys have ever painted an Evinrude? How many different colors are there? I just can't find a definitive answer anywhere!
  14. LaqueRatt

    Evinrude Paint

    Is this motor the same color? It's a '77.
  15. LaqueRatt

    Evinrude Paint

    Searched for two hours last night and I'm more confused now then when I started. What color is this engine? Blue? Green? Gold? In case you guys are wondering, yes I'm partially color blind.
  16. LaqueRatt

    Evinrude Paint

    Thanks Scott. That explains why I can't find it. So guess OEM paint is the only game in town. I can work with it I reckon. Hope it comes in a good sized can, little cans never seem to do a good job. I do have one of those triggers and if the can sprays well the results rival using a spray gun...
  17. LaqueRatt

    Evinrude Paint

    It seems the prevailing opinion is the OEM paints are runny. I read it on the internet so I know it's true......LOL So nobody has tried any alternatives? I've found out the Dupli-Color people say is a close match is actually part of the Truck, Van, and SUV line. Maybe discontinued? I'm just...
  18. LaqueRatt

    Evinrude Paint

    Is OEM paint any good though? Seems a lot of people don't think so. Is Moeller a good paint? Expensive?
  19. LaqueRatt

    Evinrude Paint

    Have several mid 70s Evinrudes I'm fixing up. Just wondering what you guys are using for paint? I've read that Dupli Color T155- Light Blue is a good match, but can't find any with that part no. Looking for a close match, doesn't have to be perfect. Also looking for some touch up paint that IS...
  20. LaqueRatt

    Evinrude 25 - Spun Prop?

    That is my take on it as well. I'm just surprised the hub isn't munched. At first it did seem like cavitation, like the prop was out of water, but afterwards it wouldn't move at all except at low RPMs. Which is what it's supposed to do right? I was clear to the other end of the lake so was happy...
Top