Search results

  1. dlogvine

    1997 Kawasaki 750ZXI broken exhaust hose through hall fitting coupler

    I took my jetski to the lake and noticed significant amount of water in the engine compartment. In about an hour of riding it got about 7-8". First I drained it and let it stay in the water for 10-15 mins but no water was getting inside. I took it to mechanic but they could not find any internal...
  2. dlogvine

    ​4.3 v6 freeze plug locations

    I started putting together 1993 4.3 V6 Mercruiser. It has no balanced shaft, standard rotation. First thing, I put the freeze plugs. 1.5" brass plugs locations (8 total) were easy identifiable, camshaft plug also (which I would install later after the camshaft bearing inserted. But then I had 4...
  3. dlogvine

    Chevy 4.3 V6 Vortec Replacement Engine..Carburator vs TBI

    I just purchased a vortec 4.3 v6 block and set of heads. The engine is from a car and it had TBI. Im thinking about reusing the small block and heads as a marine engine. Intake manifold of the original engine was TBI but it was bad. So now im rebuilding this engine, cleaned and rebuild the...
  4. dlogvine

    looking for a new boat stereo

    I want to replace my current boat cd player. my current cd player is relatively new, about a year old Sony MEX-N5100BT and is a nice stereo, unfortunately due to its location in the lower part of the dashboard it is hard to reach controls while the boat is running. Also the splash guard is...
  5. dlogvine

    1993 Bayliner Capri

    I bought this boat for one purpose, I needed an outdrive for my other boat. When I looked at the boat it seemed to be completely trashed, upholstery was gone, engine seemed to be frozen, carburator had white powder inside and its valves were shut. Looked like the engine was all rusted out...
  6. dlogvine

    Rochester Quadrajet carburator rebuild

    I just bought a replacement carburator for my 1992 Mercruiser 4.3 v6. It is Rochester quadrajet carb, but when I tried to find a kit to rebuild it, I could not find any number ID on this carb. It is Rochester 4MV 4BBL carburator but I'm not sure if all these carburators use the same kit or I...
  7. dlogvine

    Alpha one gen 2 drive shaft scratches

    I was rebuilding an outdrive yesterday and after removing an impeller found that there was some significant scratching on the drive shaft right under the impeller. In other places the drive shaft is smooth and clean. How damaging could these scratches be to the outdrive gears and overall...
  8. dlogvine

    water in bellows alpha one gen 2 outdrive

    I was going to remove the engine of my 1993 bayliner capri yesterday. So i thought it would be a quick job to remove the oudrive by myself first and then my friend would have helped me with the engine. However, the task appeared a little more difficult then expecter, after removing prop and...
  9. dlogvine

    US Marine Speedometer trim ring

    Im restoring 1993 Bayliner Capri and the US Marine Speedometer trim crimp ring, about 3" wide is all chewed up and in the latest stage of deterioration. I believe that speedometer gauge is 2.75" diameter. I tried to find something similar on ebay or amazon, but cannot find anything that even...
  10. dlogvine

    removing bow side panels 1993 Bayliner and 1993 Larson

    Im redoing upholstery on both of these boats and on both front bow panels there is no access to the holding hardware. I've been told that the holding bolts were installed before the fiberglass cap was put on. There are two bolts on each side holding the panels to the center supporting fiberglass...
  11. dlogvine

    engine head parts container

    Im taking apart mercruiser v6 4.3l engition. I marked all the pushrods, lifters, valves, etc with an oil based marker, but i am affraid that when ill start cleaning them the markings will be gone and ill lose the order for the installation. I wondered if there are any plastic containers with...
  12. dlogvine

    looking for an moeller electronic fuel sending unit part

    I was checking the fuel leak on my boat and found out that the electric part on the top of the fuel sender was broken. I tried to find this part online but was out of luck. I really don't want to buy the whole unit just to replace it. any ideas as to where I can buy it? thx
  13. dlogvine

    Indash depth sounder and transducer

    I have a Lowrance 3500 indash sounder with in-hull transducer. However it has a bad LCD display and it shows scrambled digits. I started looking for a replacement of the gauge with the similar one so that I can keep the transducer and not have to install another one. Cannot find the same model...
  14. dlogvine

    mercruiser V8 5L fuel leak

    Boat is Ebbtide Champione 210 with v8, 5.0 mercriuser engine. I noticed a strong fuel smell in the engine compartment after I run the boat even a little. It shows only after engine start. However I was not able to find a source of this leak. It definitely does not occur from the carburetor...
  15. dlogvine

    The engine keeps running for a couple secs after shutoff

    When I shut off the engine my Ebbtide, 1998 5.0 V8 engine with a two barrel mercarb, the engine does not stop immediately but turns and fires several more times, for about 20-30 secs. I wonder if it could be caused by high idle setting on the carb, so it does overflow the carb and keeps...
  16. dlogvine

    replacing Mercruiser 4.3 v6 1993 engine with Chevy s10 4.3 v6 1993

    I bought a 1993 Bayliner Capri with 4.3 v6 mercruiser engine. originally I thought about taking the outdrive and parting out the rest since the boat with the trailer was very cheap, but after inspecting the boat I realized that the deck and the boat is in a good shape despite having engine water...
  17. dlogvine

    Mercruiser 5.0 v8 no ignition

    I got mercruiser 5.0 v8 engine completely rebuild and installed it on Larson 93 boat. Connected the battery and cranked it. It turns, but no spark or ignition. I installed a new distributor cap, spark plugs and spark plug wires. What should I check to see if there any spark happening? Thx
  18. dlogvine

    Apha One Gen 2 gear ratio

    I wanted to switch the outdrives on my old boat and a new one. Both boats have exactly the same Mercruiser 5.0 V8 engines, one made in 1998 the other in 1993. I checked out the gear ratio labels on both outdrives, the newer says 1.81R, the older says 1.65R. Both are Apha one gen 2 outdrives and...
  19. dlogvine

    Stuck gear lube screws Alpha One Gen 2 outdrive

    I tried to change gear lube and appears that both lower and upper vent lube screws are stuck pretty well. I dont want to strip or break the screws, so I wondered if there is a way to unscrew them without damaging. Do I need a special screwdriver? Would impact wrench work? Thanks
  20. dlogvine

    Lowering down Alpha One Gen 2 outdrive without the battery power.

    Is it possible to lower an Alpha One Gen 2 outdrive without the battery power? I was trying to do the gear lube change and needed to move the outdrive into the lowest position, but did not have the working battery in the storage. Was there any way to lower the outdrive without going home and...
Top