Search results

  1. dlogvine

    1993 Mercruiser 5.0 V8 Gear Lube monitor

    I noticed that there is no Gear lube monitor on the engine, but im not sure if it was there originally. My newer boat 1998 Ebbtide with the same engine has the monitor. Should I get one, or it is not necessary? The outdrive is Alpha One Gen 2. Thank you.
  2. dlogvine

    Bravo 1 maintenance frequency

    Kinda lame question, but wondered how often should I change the oil in the Bravo 1 outdrive and how often should I change the impeller/gaskets in the water pump. This is my friends boat and he said it was serviced last year before the season started. The boat was kept outside in Arizona, so the...
  3. dlogvine

    Milky white drain after lake

    I went to the lake today and after some boating, about 2-3 hours of engine running with about 1.5 hour of inflatable towing I drained the water from the drain plug. The drainage was milky with some oily filling. I checked out the oil in the engine, looked clean, no water, level was...
  4. dlogvine

    back to back seat replacement

    Im restoring 1993 larson 200sei boat. Both back to back seats are in really poor condition, both the upholstery and the frame. However the rectangular frame they are sitting onis still not to bad on both. So i decided to replace both seats. I have a couple decent back to back seats on my old...
  5. dlogvine

    Mercruiser 5.0 v8 water pressure sending units and caps

    Putting together Mercruiser 5.0 v8 1993 engine. Both sides of the block have an opening that a water pressure sending units or a cap can go in. Also there is another opening on the exhaust that has the same diameter. I have a couple sending units that I believe are left from disassembly. The...
  6. dlogvine

    1993 Larson 200SEi

    This is how the boat looked at the beginning. Thought it would be mostly some upholstery work and a little bit of engine adjustment.
  7. dlogvine

    1998 Ebbtide alarm warning on ignition

    When I turn the ignition key the warning alarm starts going on immediately. I thought it should be a 3-4 seconds delay before the alarm starts. Is there anything I can do to adjust the delay time?
  8. dlogvine

    Mercruiser 5.0L V8 and Alpha One Gen 2 installation alignment

    We rebuild Mercruiser 5.0L v8 and now we are trying to put it back in. We also removed the outdrive. We originaly thought about using exactly the same settings of the engine mount to put both the motor and the outdrive in. However I have doubts about installing the engine and the outdrive...
  9. dlogvine

    Adjusting the boat cover for the wakeboard tower

    I got a wakeboard tower on my boat and now I've got a dilemma, should I try to adjust my old boat cover, which is in great condition, well fitting and of a good quality material, or should I pursue buying a new boat cover which is at least $300? I think that cutting the holes for the tower...
  10. dlogvine

    1993 mercruiser v6 replacement with 1982 omc v6 3.8

    I bouhht a boat, Bayliner 1993 175 with a v6 mercruiser motor. However, the motor appeared to be in non working order, I'll still have to determine the amount of damage, but when I took the carb of, it was seized with significant water damage. So my guess, the engine is dead as well. I found...
  11. dlogvine

    Alpha One Gen 2 outdrive

    I just bought a boat with V6 mercruiser engine and Alpha one Gen 2 outdrive. It has a sticker SE116 on it (picture attached). I want to replace my current outdrive, also Alpha One, Gen 2 with the one i just bought. The engine on my old boat is Mercruiser 5.0LX V8. The question is, are these...
  12. dlogvine

    Seadoo 2002 LE Sportster LE repair manual

    I just purchased Seadoo 2002 LE Sportster LE with Rotax 951 engine. The engine was removed and not installed back, so I would need a manual for this, looks like the exhaust manifold is also sitting separately. Where can I purchase or download the repair manual for this boat? Thx
  13. dlogvine

    Inline Chevy v6 mercruiser (around mid 80s) and Prealpha outdrive for $500?

    I found an internet sale of an old boat, mid 80's with a trailer. The boat's hull is garbage and goes to the dumpster, the trailer is also older one no title. however the engine was just rebuild, new everything, pistons, valve job, rebored cylinders. Whole 9 yards. Everything is nice and clean...
  14. dlogvine

    Priming Mercruiser 5.0LX V8

    I was using the primer to push the new oil through the newly rebuild Mercruiser 5.0LX V8. After a couple minutes of priming I got oil coming from the push rods on the port side and the oil was coming fluently when I continued. However there was no oil from the push rods on the starboard side...
  15. dlogvine

    Tachometer calibration and fuel gauges

    I changed the tachometer gauge on a 1984 boat with OMC 3.8L v.6 engine. Had to exchange it once since the first tachometer that I've got through eBay was dead. The other one, medallion B-3150 is working but looks like it shows up RPMs way too high. I can even hear it by the ear, when it is about...
  16. dlogvine

    OMC 3.8 v6 1984 fuel leak

    I finished restoring the Mercedes (Freedom Boat) 1984 with v6 3.8L engine. It had some really weird flame arrestor before, so I tried to use an old flame arrestor from 3.0 Mercruiser engine, It has a slightly smaller flange opening and did not go all the way down to the carb. When I tried to run...
  17. dlogvine

    1993 Mercruiser 5.0 V8 short block assembly

    Im trying to reassemble 1993 V8 5.0 Mercruiser engine. It was rebuild completely, so we started with the camshaft and crankshaft. Then we inserted new pistons with the rings. Both rod and crankshaft bearings were replaced with the new ones. The problem started when I tried to torque the rod...
  18. dlogvine

    Alpha One outdrive housing

    I have a 1993 Mercruiser 5.0L engine with Alpha One outdrive. There is a chipped piece of aluminum on this outdrive, probably from the fin attachment. I found the lower unit for the alpha one outdrive with a good housing (picture is attached). The owner knows only the year of this product 1973...
  19. dlogvine

    Mercruiser 5.0 V8 cranking

    Just got a Larson SEI 200 BR boat. with Mercruiser 5.0 V8 engine. At first thought that the starter does not crank, but when tried to turn the engine manually, realized it was frozen. So I removed the spark plugs, they were pretty rusty, and filled the cylinders with Mystery Marvel Oil. Let it...
  20. dlogvine

    fuel gauge sender replacement

    Im replacing an old fuel gauge sender unit. It is a float on a lever arm, it goes into a fuel tank and is fixed to the tank by 5 screws. The gasket and installation hardware are included in the replacement kit. However, im not sure if i should use some sealant and if yes, what kind. Could not...
Top