I have a 85 mercruiser 140. I took out for first time, running at about half throttle the boat slowly slowed to an idle had to idle back in. Would only rev to about 1100 rpm. Suspect the fuel pump. Tested with fuel pump tester got no reading but was still idling but running rough. Took fuel pump...
I have a 1986 sea ray mercruiser outdrive. I was getting gear oil in the bilge. I thought the gimbal seal was bad, I know bearing is bad. Took it apart and the drive shaft bellows had alot of gear oil in it. My understanding is there should be no oil in the bellows. Therefore I suspect the inner...
Re: How much material to order?
Transom and cuddy checked out good. Heres some pics. Just pl'd in the pieces, now start paying to heat the garage all the time.
Re: How much material to order?
Just received all the material from US Composites, heres my work area. Have a nice floor fan for venting fumes without sucking out too much heat.
Re: How much material to order?
Sorry I didnt get real detailed. The bulkheads and motormount were also mush. Just test fitting some Arauco parts. Wish I had the patience to give all.... my step by step project. Ill try to get more pics of progress.
I have a 19 foot "85 Sea Ray cuddy. Deck and stringers are (were) rotted, with 100% of advice coming from this forum ive removed them. Getting ready to order from US Composites. I would like to order the majority of what i need all at once resin, csm, 1708. Has anyone kept track of what they...
Hi im new to the forum and the fiberglass boating world. my name is Brian and i just bought a 19' 1985 Sea Ray Seville.
Doing the usual cleanup on a new toy i noticed the wood around the gas tank was rotted, looks like a 1 by 2. started digging it out and it extends up under the floor just...
