FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
Re: No Power Help ME PLEASE......
OK let me start by saying Im sorry for all the confusion, wrong terms, and not posting a picture of that I'm talking about, so let me start over.
I have this part ( pic below ) that was runing from the motor to the gas tank . I cut the line when I pulled the...
Hello,
I wanted to see if someone could help me. This is my first project boat and first time I ever tried a project this big. I got a 1989 Sea Ray Seville 20ft with a 1988-89 Mercruiser 4.3 L ( 2BBL GM 262CID ) serial on the boat motor is # B914147.
I took the motor of the...
Re: 1987 Sea Ray Seville 20ft
Morning Tpenfield,
Well lastnight i finally had time to play with the motor . I tried wiring it up like you suggested But Im still not able to get the starter to crank anymore. I have a brand new battery and just had the starter...
Re: 1987 Sea Ray Seville 20ft
Tpenfield,
Sorry if I seen to be a bug here but I wanted to see if you could verify connections before I try it.
you told me to " The round connector (up top of the engine) actually has the connections that you would need to power the ignition...
Re: 1987 Sea Ray Seville 20ft
Tpenfield,
you are correct, Here is the info I found for the cylinder head, Im going to get a drimel tool and clean it up to see if it is a crack or a imperfection. Also I belive I found the wire diagram to my engine and I will try that jumper...
Re: 1987 Sea Ray Seville 20ft
1. I forgot to mention I talked to maintaince guy here at work and he told me that the line on the Cylinder cover ( dont know the correct name ) could be just from the mold from when they make the cast for this part, since the line is straight along the seem and...
Re: 1987 Sea Ray Seville 20ft
Afternoon guys we still have a pulse..
Yesterday before the Daytona race I deiced to put the starter on and see if it would start. It cranked and sounded like it wanted to start but would not kick over . I remembered that I disconnected a couple of ground wires...
Hello Boaters
I wanted to post a few pictures of my boat before I start the Restoration. I have my game plan ready :)!!! I will start getting the materials this weekend from Lowes, plywood, acetone, ect. But I'm still looking for a place to get the roll of 1708 and a roll of chop strand...
Hello,
all my name is Mike and I wanted to see if any fellow boaters could give me some pointers . this is my first time with a big boat so I will apologize now for any stupid questions that I may ask. before hand ... Well I recently aquired the boat above .The motor works but the...
