For some reason today I looked online again and found the year and what model style I have. So I now know that I have a weedless wedge (WW) model from 2007(AH). Finally got power to unit today and nothing from the foot pad. Battery indicator on motor is reading 3 out of 4 bars. Now to...
Bought a used MK Powerdrive v2, getting ready to mount it and am wanting to buy the copilot upgrade for it (it currently is foot pedal only). Not clear on how I am reading my serial number as it doesnt match the info given online. Serial number sticker on bottom of head unit is WWAH2529875...
I rebuilt the carb on my mariner 15 hp serial number OC223925 and have had issues keeping it running. It will run with choke pulled out but dies as soon as I push choke in. Searching the forums I have seen same symptoms in similar models that carb is still dirty or jet is plugged.
Is there a...
So have been having issues with my 1983 Johnson 70 hp motor Model # J70ELCTE that idles fine but wont get up to speed. I was thinking carbs but while tinkering today I noticed that the linkage to the bottom carb (there are 3) was out of the retainer and just floating free. I am wondering if I...
I inherited two penn downriggers from my brother who recently passed away. Fathom Master model 805 pre 2006 models.Warranty paperwork I have is dated August 2005. They were stored in his garage up in the rafters so am assuming he had the same issues I am having.
So when I power up both units I...
Johnson 70 hp J70ELCTE
Started up motor on the muffs so I could warm up lower unit a little to change oil. When first started got a great tell tale stream running. As it warmed up tell tale slowed down considerably and water coming out was getting almost too hot to hold my hand under the...
I had this same problem last year and ended up buying a new t n t motor to fix the issue. Once again, my t n t motor is not responding to the switch on the throttle shift lever. I have read that to test the trim motor itself, you need to apply 12V to the Green wire (down) or 12V to the Blue...
I lost the trim to my 83 johnson 70 hp. Is there a way to disengage it so I can lift the motor up? Relays are both clicking but no power to the trim motor. Just want to get things up out of the way without having to break the lines open.
I have been looking to buy a spare prop for my outboard and do not know how to tell the difference between the small gearcase or the large(commercial) gearcase. Is there way to tell which one is which? Serial #? Exhaust cover size? I am a bit lost at the moment.
Serial # for this motor is...
I was out salmon fishing yesterday in Puget Sound and was moving from one spot to another. I had pulled the kicker motor up (the evinrude 9,5 hp) and was underway when i hit a couple of good waves and it caused the klicker motor to slam down to the trolling position. I stopped the boat and...
I posted a last year about the shift issue on my '70 evinrude 115 model 115083 I finally got around to verifying that it is indeed the selector switch for reverse that is not working. When I had the lower unit apart this spring to replace the impellor I did a test on both leads to the...
I am trying to do a compression check on my 115 hp model 115083D 1970 evinrude. How and where do I bypass the safety switch to do a full throttle cranking with all the plugs pulled?
Hi guys, I have a 1970 Evinrude OB model # 115083D that I inherited with a van purchase. I knew the boat had no reverse working and found out that the previous owner had used regular lower unit oil and not the premium blend. I have been looking for a replacement lower solenoid to possibly get...
My '73 Mecury model 110 9.8 hp serial number 361558 is losing the top cylinder after about 5 - 10 minutes of trolling. After talking to a buddy of mine he thought I should not be using the new spark plugs I had just installed. They were NGK gapless style.
I went to the NAPA store and purchased 2...
My brother in law has a 1970 (Bell Bouy??) 19 ft in length and last summer we broke the steering cable where it attaches to the transom mount. We removed the steering cable this morning but are unable to find a replacement cable. The tag on the plastic part of the cable Was MARMAC Products Inc...
