Da_Frigifration_Man
Recruit
- Joined
- Apr 5, 2011
- Messages
- 3
Just wondering guys, i have a 1980 Hydra-Sports Classic III i'm putting a new deck in. The old deck was put on before the top half was installed, and i would love to redo it that way, but i don't have the time and the help to. What I was going to do is just lay the plywood over the lip from the edges where it extends out over where the old wood was. Only problem is that the edges of the wood are going to create a "ditch" or dam for the water to sit in, and i know that is not good. My question is that can I make a filler w/ some polyester resin and wood dust? Ive got plenty of dust so i could make it as thick as it needs to be. I would make kitty hair or something like the peanut butter but the budget is the thing. I'm just going to fill the gaps with it and smooth it out to make a uniform rounded edge and like I said it's right against the wall so it wont be being stepped on.
Any opinions, or advice would be greatly appreciated
Any opinions, or advice would be greatly appreciated