Recent content by bubbasblazer

  1. B

    30hp Tohatsu stalls under load

    I have a 30hp 2 stroke M30a3 that has been giving me trouble for quite some time now. It's my duck boat and occasionally use it for fishing. Last season the boat would run fine then die out similar to letting go of the handle on a push mower. I replaced all the lines , fittings, primer ball...
  2. B

    tohatsu m30a3 stalls when throttled up

    I have 30HP 2stroke m30a3 tohatsu that is usually very reliable. Went duck hunting and I was stalling. I finally got it fired and it ran great. Went to leave and it would stall as soon as I touched the throttle. I suspected the primer ball I removed it and ran straight from my fuel filter with...
  3. B

    Tohatsu M30A3

    I have a 30hp tohatusu 2-stroke. We went out duck hunting for the first time this year and I hit the key but no start the starter never engaged. I get a click on occasion when I turn the key. I work in aouto parts and have figured the solenoid may be bad, but after trying to cross the solenoid...
  4. B

    6hp johnson id.

    I have a 6hp johnson probably 60's or early 70's with serial #j3378354 on a freeze plug and am hitting a roadblock trying to figure the model number. There is supposed to be a tag on the transom mount area but it has since disapeared, any help would be appreciated.
  5. B

    Identification

    I have an old 6hp johnson and would like to find a repair manual but not sure how to find out what year it is any ideas. There is a # stamped on a ?freeze plug? not sure how to decipher it though. Any help would be appreciated.
  6. B

    Old 6hp johnson

    I have an old johnson 6hp probably from the 60's or early 70's?? maybe . The carb has the mixture screw coming out the front it and coming through the lower part of the housing. After replacing the waterpump and rebuilding the carb. It will not start. I am mechanically inclined and have set the...
  7. B

    1976 starcraft rivets

    I am new to I boats and have been doing research on replacing leaky rivet on my '76 starcraft. I hope this is the right thread to post in. All my leaky rivets are where the keel is joined to the boat. I have looked at other threads and found very good info but I have a few questions. What are...
  8. B

    Freezing cables

    I use my 76 starcraft for mostly duck hunting in the winter, I have replaced my cables and have what I believe to be, enough of a loop as not bind the cable, however when it is super cold the boat won't go in gear. I usually end up removing the cable from the motor putting in gear at he motor...
See more
Top