Well I just finished removing the flywheel off my 1968 Johnson 6hp. Came off no problem with an autozone harmonic balancer puller and some 1/4-20 8 grade bolts.
A leather belt to hold the flywheel when wrenching was a crucial tool (all information was gained from this site :D)
So now that the...
I am going to remove the flywheel from a 1968 Johnson 6hp and I will be borrowing a harmonic balancer puller from Autozone.
First, how the heck do I use a harmonic balancer puller?
Second what size bolts do I need? (They will be grade 8).
Thanks guys.
I am thinking of changing over my batteries to AGM batteries. I need to replace my wet cell batteries and am looking into th Cabelas AGM group 27 batteries.
Now my question is this: I have a car battery charger that charges at either 2 or 10 amps that I have used for years with my wet cells and...
I am looking to possibly purchase a 1949? Johnson 10hp. I dont know much about the engine. These are the specifics: 1949 model Qd-10 Ser. 748920.
Is it actually a 10? Twin cylinder?
Also it comes with a pressurized tank. It hasnt been run since 1998 but it looks to be in pretty good condition...
I have a 1984 Skeeter ss-1 Fisherman 16' bass boat with a 75
merc outboard on it. This thing really flies:devil: I am guessing maybe somewhere in the range of 50+ MPH.
I am worried about the water pressure at max trim at WOT. I dont have a water pressure gauge right now so is there any other...
I have a 1989 Jeep Cherokee XJ 4WD with the 4.0 liter with 155k miles.
The truck overheats when towing the boat on any type of hill, on larger grades I am forced to stop halfway up to allow the engine to cool off so it wont overheat.
It does not appear to have the trailer towing package but Im...
I have 1984 Skeeter ss-1 fisherman that is 15.5 feet long with a 75 horse merc. on it.
It has a doel-fin hydrofoil on it that came attached by the previous owner when I bought it.
When the boat is on plane at WOT it seems that the boat rides too much in a bow down position even when trimmed...
I need a new bow mount trolling motor for my 15.5 foot Skeeter bass boat. Im thinking about finding a used Motorguide Brute 12/24 volt 56 or so lbs. thrust.
Currrently the boat is rigged for a 12 volt in the front, how hard would it be to convert to 12/24 volt operation?Would it only require...
I want to install a tranny cooler in my Jeep and was wondering what there is to the process. Is it relatively easy to install one yourself or is it something I shoule leave to a professional mechanic?
I went and started up my 1992 25 horse evinrude and when I was returning to the dock I noticed that there was white smoke coming out of the exhaust. Does this mean there is water in the gas or is it like a car where water vapor will come out of the exhaust on cold mornings? The air temperature...
I need a new car to replace a 1989 jeep cherokee and am thinking of getting a 2000-2004 toyota tacoma prerunner with the 6 cylinder engine. I tow a 1984 Skeeter SS-Fisherman 15 foot bass boat with a 75 merc. I think this rig weighs in with trailer and batteries (3) and gas (12 gal) at around...
I have a 1968 6 horsepower Jhonson and it seems to be leaking some pretty strange stuff, it looks kinda like grey watery grease and it smells like gas. It comes out of an opening that I think is the exhuast, its right above the propellor and is attached under the anti cav. plate. Any ideas of...
I want to be able to recharge batteries while running on the water and I was wondering what the easiest way to go about this would be. I think I would need to install an alternator, but Im not sure. The engine is a 84 Mercury 75 horse outboard hooke up to a 15 foot skeeter bass boat. Thanks...
I have a tank of mixed gas (10 gal.) that has been sitting for six months. Is it safe to run this gas through my engine? Its an 1984 75 horse merc. I did not add any fuel stabilizer to the gas thinking I would use it up in a couple of weeks. If I had added fuel stabilizer would the gas be...
